Printable View
Hi Don
Sorry I was trying to say the menus to enable RC are missing out of my channel map , hopefully you will see what I mean from the link
I have attached a link to my channel map.
https://www.dropbox.com/s/h2q1hyr23x...084-N.CSV?dl=0
Regards
Craig
Craig: What a very interesting problem - thank you for raising it!!!Quote:
Originally Posted by scaper28
Fortunately your car and mine have the same BCM - see as follows:
scaper28 - BCM
DV52 - BCMCode:SW:5Q0-937-084-N HW:5Q0-937-084-N --- Cent. Elect. --- SA: 03147,,,,
;Component:BCM MQBAB M H14 0106, Coding:03000842C241027B0FA44080B1040328100A000000000000000000000000,,,
;EV_BCMCONTI,10001,EV_BCMBOSCH_010.rod,,
;Thursday,29,June,2017,08:31:39:20275
;VCDS Version: Beta 17.6.0 (x64) Data version: 20170602 DS274
I was able to replicate your problem by creating an Admap of my BCM using the same Beta software version as in your file (i.e. Beta SW ver 17.6.0). I then compared the ver 17.6.0 admap with an admap from a previous Ross Tech version (i.e. ver 16.8.0)Code:SW:5Q0-937-084-N HW:5Q0-937-084-N --- Cent. Elect. --- SA: 31347
;Component:BCM MQBAB M H14 0106, Coding:03001842C24102FB0FA4400000040308100A000000000000000000000000
;EV_BCMCONTI,010001,EV_BCMBOSCH_010.rod
;Friday,30,June,2017,18:20:07:16808
;VCDS Version: Beta 17.6.0 (x64) Data version: 20170602 DS274
I was pleasantly surprised to discover that the latest Beta version software found 78 x new adaptation channels in my BCM that were previously unknown.
However, I also sadly discovered that the latest Beta verion software lost 68 x old adaptation channels from my BCM that were previously known
Here is the list of the Adaptation channels that were lost from my previous version SW (I've highlighted your missing channels):
Just to be clear - the list above are those adaptation channels that appeared in the BCM admap using version 16.8.0 BUT do not appear in the BCM admap using Beta version 17.6.0Code:ENG122976-ENG128460-Remote_Start_Adaption-Rueckmeldung_bei_Aktivierung
ENG122976-ENG128461-Remote_Start_Adaption-Kombi_Fahrerhinweis_m_Uebernahme_RSt
ENG126561-ENG100480-Innenbeleuchtung KL 58xs min-Y2
ENG126561-ENG100773-Innenbeleuchtung KL 58xs min-Y3
ENG126561-ENG101574-Innenbeleuchtung KL 58xs min-X1
ENG126561-ENG102140-Innenbeleuchtung KL 58xs min-X3
ENG126561-ENG115658-Innenbeleuchtung KL 58xs min-x0
ENG126561-ENG115659-Innenbeleuchtung KL 58xs min-y0
ENG126561-ENG99557-Innenbeleuchtung KL 58xs min-X2
ENG126561-ENG99777-Innenbeleuchtung KL 58xs min-Y1
IDE01268-ENG02321-Windshield wiper-Tippendes_Frontwaschen
IDE01268-ENG02322-Windshield wiper-Frontwischer_Abtauposition
IDE01268-ENG126844-Windshield wiper-Washer_Tipwiping_Variant
IDE02269-ENG02272-Acknowledgement signals-Quittierton bei zweitem ZV-AUF-Befehl
IDE02269-ENG02273-Acknowledgement signals-Quittierton bei zweitem ZV-ZU-Befehl
IDE02711-ENG02323-Rear Window Wiper-Einzelansteuerung Heckintervallwischen Zeitintervall 1
IDE02711-ENG02324-Rear Window Wiper-Einzelansteuerung Heckintervallwischen Zeitintervall 2
IDE02711-ENG02325-Rear Window Wiper-Einzelansteuerung Heckintervallwischen
IDE04923-ENG02307-Turn signal control-Abbruch Komfortblinken
IDE04924-ENG126816-Driving light and parking light-Standlicht aus
IDE04927-ENG126845-Window heater-FSH Automatik
IDE04927-ENG126846-Window heater-Abschalttemperatur fuer Heckscheibenheizung
IDE04927-ENG126847-Window heater-Abschalttemperatur fuer Frontscheibenheizung
IDE04928-ENG126842-Anti-theft device-Ueberwachung Innenentriegelungshebel
IDE05142-ENG02314-Access control-Heckfreigabe_Ohne_Verzoegerung
IDE05142-ENG02315-Access control-Deaktivierung_Laderaumschliessung_extern
IDE05142-ENG02316-Access control-LS_Taster_Togglefunktion
IDE05142-ENG02317-Access control-Nutzfahrzeug_Schliessung
IDE05142-ENG02318-Access control-Wiederverriegelung_Laderaum
IDE05142-ENG06090-Access control-Mindestbetaetigung_HDF_Innentaster
IDE05142-ENG115722-Access control-Elektrische Laderaumabdeckung
IDE05142-ENG125652-Access control-Servoheck Schlossansteuerung
IDE05142-ENG125653-Access control-Deaktivierung_SAFE_ueber_DWA_Deaktivierungstaster
IDE05142-ENG126837-Access control-Entsafen mit autorisierte Klemme 15 Ein
IDE05142-ENG126838-Access control-Softtouch-Betaetigung senden
IDE05142-ENG126839-Access control-Entriegelungwunsch_verzoegert_waehrend_Zuziehvorgang
IDE05142-ENG126840-Access control-Vorrastenhaenger_Freigabe
IDE07470-ENG02308-After-run for park light-Bedingungen zur Standlichtbegrenzung
IDE07470-ENG02309-After-run for park light-Bedingungen zur Parklichtbegrenzung
IDE07470-ENG02310-After-run for park light-Faktor fuer Verfgbarkeitstimer
IDE07470-ENG02311-After-run for park light-Standlicht-Verfgbarkeit
IDE08542-ENG02339-Access control 2-Spiegelanklappen_bei_Wiederverriegelung
IDE08542-ENG115869-Access control 2-Virtuelles_Pedal
IDE08542-ENG125654-Access control 2-Nachsaven_nach_Verdecklauf
IDE08542-ENG125655-Access control 2-Regenschliessen_ein_aus
IDE08542-ENG125656-Access control 2-Regenschliessen_art
IDE08542-ENG125657-Access control 2-Remote_Unlock_Lock
IDE08542-ENG126610-Access control 2-Signalisierung_Spiegelanklappung
IDE08542-ENG126611-Access control 2-virtuelles_pedal_HMI_einstellbar
IDE08542-ENG126841-Access control 2-Profilfunktion fuer Anklappung der Aussenspiegel
IDE08542-ENG128459-Access control 2-easycloselight_aktiv
IDE08786-ENG126628-Assistance light functions-LS_Error_Ausgabe
IDE08786-ENG126817-Assistance light functions-Umfeldleuchte als Manoevrierleuchte
IDE08786-ENG126818-Assistance light functions-Fahrlichtwarnung_Hinweis_Konfig
IDE08786-ENG130581-Assistance light functions-Fahrlicht_Hinweis_mehrfach
IDE08788-ENG126629-Dyn. turn signal modes-Telematikblinken1_STS_Blinken Telematikblinken2_OCU_Blinken
IDE08788-ENG126819-Dyn. turn signal modes-Emergency_alert_blinken
IDE10298-Alternating park position 1
IDE10299-Alternating park position 2
MAS01490-ENG02328-Energy management-Praediktives_Energiemanagement
MAS01490-ENG116830-Energy management-Energy_Management_Adaptation
MAS05934-ENG02319-Convert. top oper.-Remote Lock Unlock Timer s1
MAS05934-ENG02320-Convert. top oper.-Remote Lock Unlock Timer s3
MAS05934-ENG126630-Convert. top oper.-Reichweitenbegrenzung fuer Servoheck schliessen
MAS05934-ENG126843-Convert. top oper.-ZV verriegeln bei Klemme 15 Ein
Alas, I have no idea why this has happened - I suggest that you contact Ross Tech for a response. However, if you want to proceed with the tweak - please use a previous release VCDS version
Don
Don
Thank you so much I will do that now , I thought I was going mad not being able to find it .
Much appreciated for your help and time .
well giving that I can find 16.8.0 download , as typically every time I update I delete the old downloads so I am now searching google for a previous version download of it .
Craig
Is it possible to activate a indicator in the cluster for the low beam light or the drl light?
Just to know when the low beam is on or off, or the drl is on or off.
Question: Anyone have an OBDeleven? Is it worth the money?
https://www.autoinstruct.com.au/prod...nostic-system/
Yea it is worth it's money, tested on numerous golfs and polos plus a few skodas really handyQuote:
Originally Posted by stark27
ala: Hi. You didn't mention what flavor mk7 that you own (which build year and which model).Quote:
Originally Posted by ala
There are a couple of adaptation channels in the BCM that appear to be appropriate for your wants. They are:
- IDE06864-ENG115733-Daytime running lights-Tagfahrlichtkontrollleuchte (for earlier model BCM) which has a factory setting of not active. "Tagfahrlichtkontrollleuchte" translates to "DRL indicator light" - I think. Later model BCMs use ENG10575-ENG115733-Außenlicht_Front-Tagfahrlichtkontrollleuchte
- IDE04924-ENG115858-Driving light and parking light-Kontrollleuchte fuer Begrenzungslicht (for an earlier model BCM) which has a factory setting of not active. " Kontrollleuchte fuer Begrenzungslicht" translates to "Indicator light for marker light" - I think. Not quite the same as the low beam, but the marker light should be illuminated whenever the low beam is switched-on. Later model BCMs use ENG10584-ENG115858-Außenlicht_uebergreifend-Kontrollleuchte fuer Begrenzungslicht.
But don't get too excited because whilst these 2 x channels look hopeful, when I've tried to activate these in the past - nothing happened! My totally unfounded belief is that notwithstanding that these two channels are indeed correct to initiate the indicator lights on the dashboard, the Instrument panel (in my car) doesn't have these required indicator lamps fitted (this is just a guess). But my car has a black and white bog-standard instrument panel.
So, if you want to experiment on your mk7 (perhaps, your car has a higher-end instrument panel) - try changing the settings and see what happens! If you get the same results as I did - just revert the settings back to their original values - nothing lost!!
Good luck
Don
Ohh. 2015 variant 1,4 tsi 122hp. comfortline.
Is it also possible to turn off the light in the cluster wenn the drl is on, so it turns on together with the low beam, because then the indicator in the cluster is not necessary.
I've turned on the rear lights together with the front drl.
But am using the foglights as drl.
I'll try the other thing next week.
Can anyone help with my Golf Gti facelift 2017 settings? I have the outer DRL and blinkers working, but not the inner ones. I see that there are bulbs inside the inner stripes but they for some reason are not illuminated.
I would like to make it work so that both DRL stripes are illuminated and also the inner blinker would blink.
Anyone knows how to do it already for the facelift?
UserName123: Hi - I note that your location is "Hell"! Are you a devotee of Dante's 14th-century epic poem "Divine Comedy", and is there a sign over the gates there saying "Abandon hope all ye that enter here"?:facepalm:Quote:
Originally Posted by UserName123
Anyhow: to your question - I'm not sure but if you post-up an adaptation channel map of the module @ address hex09 (which VCDS calls the "BCM"), then I'll have a look at what's possible in the new Golf
Don