Threaded View

Bill Lee intermittent idle dip at... 01-10-2014,
01:01 AM

Bill Lee I'm not sure how to take an... 02-10-2014,
05:56 PM

supclean Yes 10v cranking voltage... 03-10-2014,
08:16 PM

Sunny43.5 If the centre part of the... 03-10-2014,
11:28 PM

Bill Lee Can't find what's broken.... 04-10-2014,
01:24 AM

supclean Good to hear you don't have... 08-10-2014,
03:10 PM

Bill Lee UPDATE...the ignition... 13-10-2014,
03:46 PM

Bill Lee Fill in the blanks day!!
... 13-10-2014,
06:33 PM

Bill Lee OK.
The reason I asked... 13-10-2014,
07:46 PM

Bill Lee Tried all of it before... 18-10-2014,
09:45 PM

supclean Yes Sunny I think he's... 20-10-2014,
08:27 AM

Bill Lee That sounds easy, what... 20-10-2014,
03:08 PM

Bill Lee OK new battery in and guess... 22-10-2014,
05:13 PM

Sunny43.5 13.4 is normal don.t worry... 22-10-2014,
08:07 PM

Sunny43.5 Okay Bill all cars are... 23-10-2014,
07:24 PM

Bill Lee I.....I...I... 23-10-2014,
10:37 PM

Sunny43.5 Somebody please help raise... 24-10-2014,
04:05 PM
-
intermittent idle dip at operating temp and find fault.
A 7da 2.0 1997 aac pet man t4, my van is in relative good repair, but for some time a problem with the idle area has eluded me even with vagcom and physical tests and all with positive results leaving just why it behaved this way-until it stopped starting.
The van would start and run well up until warm, then it would drop momentarily almost stalling, regain in the same second until 5 to 10 seconds and do it again...regularly.
Basically the suspects (left) are injector tips, ecu, immo, CSV, ecm, iacv and a 'throttle bypass valve'.
Although I will need some info on what the actual components are for CSV ecm as I think these may be more likely the problem. Or injectors.
Essentially theres no spark from the coil but worked before it stopped. Dissy new. The order is slightly unclear 1432 with tdc and dizzy mark,rotor aligned. 1 being THE NEXT lead along?!? right.
Anyway all other things tested or evaluated show working order. Not much is left. Vagcoms only lead before was that ecu needed joining with immo which I did, its silent now.
Maybe you know the symptom.
Last edited by Bill Lee; 01-10-2014 at 07:20 PM.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Bookmarks