Are the Side Mirrors able to be programmed via VAGCOM when engaging Reverse?

Just wondering guys if possibly the polo has the coding system/VAGCOM to be able to program the side mirrors when engaging reverse to angle down so you can see the kerb (preventing guttering but also accuracy in tight streets to prevent hassle).


Cheers

Dana from RossTech provided me with a few codes to check/try but haven't tried anything yet. I've been sending him debug logs and the control map scans as they don't have a lot of info on the Polo/ECU.

I'm not really game to experiment with the missus car so I'm holding off until more info is available.

FYI: (hope its ok to quote Dana's email...)

Quote:

---

Originally Posted by Dana Smetanick;

I see a few bits that are related to comfort and rain closing. I've taken this original coding and tweaked a few things:

24B02BBF08A1000001380000742B0ED000C0410F6084000020 0000000000


1st) Comfort close roof enabled - Byte 3:

24B02BFF08A1000001380000742B0ED000C0410F6084000020 0000000000


2nd) Rain Closing Enabled - Byte 4:

24B02BFF0AA1000001380000742B0ED000C0410F6084000020 0000000000


3rd) Rain sensor active (That one is odd) - Byte 14:

24B02BFF0AA1000001380000742B4ED000C0410F6084000020 0000000000


I'm not so sure about the actual RLS itself:


Part No: 1K0 955 559 AH
Component: RLS 170510 05 54 0403
Coding: 03302D

On the Golf/Jetta Rain Closing active is Byte 0, Bit 2. Please try recoding the RLS (slave from 09) to: 07302D

---

Did anyone try this?

I haven't tried coding anything with either car yet as I haven't had much time other than run the debug results for Ross-Tech. Hoping to have some time to play around over the xmas break.

It works with memory seats option in 2008 Touareg.

http://www.vwwatercooled.com.au/foru...tled4JPG-1.jpg

Bumpage.
Any progress on this?
I'll need to do some Vagcom work when I install the bluetooth and MDI, so would like to activate this too.