Quote Originally Posted by terps View Post
where is the temp sensor located? thankyou
it's your wiring, ive repaired these before. There is a short loom that just lengthen's one of the plugs but is completely unecessary, one side of the plug rest hard up against the automatic and can be covered in battery acid and corrode.
I remove the extra loom by removing the wrecked plug and soldering up the wires. The wire colours don't match so match so make sure you
right down which meets which and you'll be fine.

Otherwise if that plug is fine then just fix your damaged wires, but it may not come out of limp mode until you clear codes once you've repaired the wires.