Columbus Navigation Voice Input

[rc_vRS]

Can't answer the OP question, but can anyone advise if voice control can be made to work by speaking the address in a normal manner, instead of backwards?
ie: addresses can't be voice-enterer (OR manually entered for that matter) by saying number, street name, suburb......
they have to be spoken/inputted as suburb first, then street name, then number

VERY frustrating, as this is NOT the natural way of writing or speaking an address.

They are all like that, it narrows down the options by selecting the suburb first then street etc.

What year is your car and does it do let you use voice input for navigation?

[Spinifex]

They are all like that, it narrows down the options by selecting the suburb first then street etc.

What year is your car and does it do let you use voice input for navigation?

Not sure if this question is directed at me, or the OP.
Mine is 2016 and yes it lets me voice input navigation - but only in the format of suburb first.
But only 1 part at a time - or it asks for suburb, then waits for my input, then street, waits for my input, then number.
I cant just speak the whole address as number-streetname-suburb OR suburb-street and-number.
VERY frustrating and unnatural way of formatting an address.

The inbuilt tomtom system on my old Mazda was similar when manually inputting (suburb first) but at least if you used voice-control (which was **** hopeless and never worked properly) and spoke the address naturally with suburb last, it would usually find where you wanted to go.

i don't understand why they program these things this way.
If you're inputting an entire address, the system should be smart enough to search for the address by breaking up the terms used instead of forcing us to speak it backwards