KVW100 Window Roll Up/Down Flash Load Module

[kapowww]

I'm sure plenty of people have done this here so no problems.. BUT...

..If you have the 1C0 comfort control model do what I did and buy an el cheapo VagCom/VCDS cable off eBay for $12 which you'll use in future anyway for diagnostics and other things and use this FREE program:

Guide: Remote Windows Activation - uk-mkivs

http://www.ebay.com.au/itm/USB-OBD-I...item2eaf800bae

[work]

.If you have the 1C0 comfort control model do what I did and buy an el cheapo VagCom/VCDS cable

Thanks for the tip! The cheap cable and czeck software just worked on my 2003 golf. Didnt get a connection with my first attempt, but I took a brave pill and pushed the cable connector in with some more force and all was good after that.

[PranK]

The czeck software and the KVW100 failed on my car.

[work]

The czeck software and the KVW100 failed on my car.

Thought I would mention it just in case, since I made this mistake initially. You need to turn the ignition to the second position, not just radio on, but get the dash to light up with all of the warning lights etc.

[PranK]

Thought I would mention it just in case, since I made this mistake initially. You need to turn the ignition to the second position, not just radio on, but get the dash to light up with all of the warning lights etc.

From memory, I think I tried everything, off, on, acc, start... But, keen to get this to work, so will try it again.

Thanks!

[kapowww]

From memory, I think I tried everything, off, on, acc, start... But, keen to get this to work, so will try it again.

Thanks!

Is your car failing to connect to the program, or is the program connecting but not working?

If it's not connecting then you have to test to make sure you can connect via VCDS-Lite and have the appropriate drivers. Then it should work with the program.

[PranK]

Is your car failing to connect to the program, or is the program connecting but not working?

If it's not connecting then you have to test to make sure you can connect via VCDS-Lite and have the appropriate drivers. Then it should work with the program.

I cant remember, its been a long time since I tried.

I know the KVW100 just gives me constant beeps, which is bad. But I cant remember what the app said. Will try it again and see.