VAG-COM Logging

**VWindahouse** · 17-04-2010, 07:06 PM

Originally Posted by insanekiwi

REVO tune seems to be quite aggressive with boost. Same with mine, peaks at 22.3psi briefly on recent dyno. And also seems to produce quite high power production at wheels. This is a good constructive thread, please keep it going.

I have VAGCOM, just haven't had time with the car recently...

Is it just me or is that an arse load of boost??

**vwthunder** · 17-04-2010, 07:48 PM

Originally Posted by Guy_H

All the specific info you need is here:

APR - High Performance Development for Audi, VW and Porsche Vehicles.

Thanks I was going by this before, wrong info

**h100vw** · 17-04-2010, 07:52 PM

That should work too. You just log exactly what you want rather than what VCDS pulls up. Try it any way, there may be some difference??
Gavin

**vwthunder** · 17-04-2010, 07:54 PM

WHat my whole problem was, that I was going off the info on the APR site.
It tells you to go to Advanced Metering Blocks, which is what I cant do

Im sure I can do it the other way

Might go try soon

Thanks for the cable tim lol

**Tim** · 17-04-2010, 08:05 PM

what troy is trying to say is that the advanced section is greyed out on his car. He only has access to just the normal measuring block section so needs to put in the number instead of ticking a box.

**h100vw** · 17-04-2010, 08:37 PM

Originally Posted by Tim

what troy is trying to say is that the advanced section is greyed out on his car. He only has access to just the normal measuring block section so needs to put in the number instead of ticking a box.

That ECU in the APR screen shots is an MED9 I reckon, maybe that has something to do with ADV blocks not being available?

**Tim** · 17-04-2010, 08:40 PM

Originally Posted by h100vw

That ECU in the APR screen shots is an MED9 I reckon, maybe that has something to do with ADV blocks not being available?

yyyyep. The above APR link is fine just not applicable to Troys car it seems.
He should be fine to do it the other way. Given he isnt online at the minute maybe he is out in port melbourne somewhere trying to wind out 4th gear