MK3 Random Thread

[KI11Z]

Paint is fine. The metal suffers from light cellulite though. Probably wouldn't notice it unless you look. But I know it's there....

I'd cry, seriously :/........ one benefit of having a soft top!

[anthony--t]

Vr6 is running rich / rough, really lacking in power and sounds very subaru. Didn't feel the need to start a new thread over it but looking for suggestions.

Vcds scan showed camshaft position sensor swapped that out with one I had but no difference, same with maf, tps, and coilpack (not 100% sure coilpack was fine) also replaced plugs and leads with new items.

Going to check over my grounds tomorrow and probably swap in a new fuel filter was just wondering if anyone had more suggestions.

[Smeeeb]

Vr6 is running rich / rough, really lacking in power and sounds very subaru. Didn't feel the need to start a new thread over it but looking for suggestions.

Vcds scan showed camshaft position sensor swapped that out with one I had but no difference, same with maf, tps, and coilpack (not 100% sure coilpack was fine) also replaced plugs and leads with new items.

Going to check over my grounds tomorrow and probably swap in a new fuel filter was just wondering if anyone had more suggestions.

Have you tried the fuel pump or fuel rails something to do with the injection system.

Maybe it's time to put a certain engine together to make a monster ))))

[KKK VR6]

Vr6 is running rich / rough, really lacking in power and sounds very subaru. Didn't feel the need to start a new thread over it but looking for suggestions.

Vcds scan showed camshaft position sensor swapped that out with one I had but no difference, same with maf, tps, and coilpack (not 100% sure coilpack was fine) also replaced plugs and leads with new items.

Going to check over my grounds tomorrow and probably swap in a new fuel filter was just wondering if anyone had more suggestions.

Back trace the wires from the cam position sensor, and see if u find any bad looking wires.
But I think the sensor you replaced it with, was faulty as well.

[anthony--t]

Bought a new camshaft position sensor. *Fingers crossed.*

All signs point to it as vcds scan showed it and the one I tried as a replacement didn't look too healthy (out of a blown engine)
Should get it tomorrow. Joys of a mate that's a parts interpreter!

[mb1907953]

Anyone know how to replace front strut mounts on coilovers? I've got them out fine but I can't loose off that nut that holds the rubber mount on without the shock absorber shaft spinning. Any ideas?

[Ben J]

20 second job with a rattle gun

Sent from my GT-I9305T using Tapatalk 2

[ffoff]

putting weight on the car can generally help it stop spinning

[Pmk]

Anyone know how to replace front strut mounts on coilovers? I've got them out fine but I can't loose off that nut that holds the rubber mount on without the shock absorber shaft spinning. Any ideas?

20 second job with a rattle gun

Sent from my GT-I9305T using Tapatalk 2

^ i second rattle gun. FInd a mate who has one to do it. I waited a few weeks for my mate with one.. The rest was a breeze. I did the rears instead while i waited without one. you'll need it.

[Ben J]

We have a rattle gun date planned <3