Search:

Use the heat gun or hairdryer. Works very well.

Hi mate, ideally you reuse the ends (connectors) or remove 1 connector only, so you void awkward angles to your new hose arrangement to provent kit. Ryco kit is good and for the cartridge...

Get the latest one. Since the older ones want work on all modules in yours.

Post it also in for sale section, mate. Someone might need it.

I'm after 17" alloys for my Amarok. Can also swap if someone's after 19" alloys, I have new in boxes 5 of them.

SA Amarok 19" rims
...

New rims in the boxes. I have 5 of them and can either sell for $1500 or swap for 17" Canyon as they come on Amarok Canyon.
Locals only. I can also drop off and pick...

Anybody wants to sell their Canyon 17” rims or swap for the 19”.
I have 5 of 19” in boxes.
SA only, will deliver....

Smart bar is now available, they also have the rear step.

https://admin.smartbar.com.au/site/wp-content/uploads/2022/02/VW-Crafter_SpartanBar_SpecSheet_SmartBar_V211221_Web.pdf

I’ve fitted an ARB deluxe bullbar while ago. The Safari snorkel still waiting to be fitted, hopefully during Easter holidays.
I can’t recommend the plastic canopy and certainly won’t buy again....

I don’t think they’re. I’m asking every time I’m buying ATE brake pads and they always say, they’re testing them and will be available soon, but they’re saying for more than 2 years now.
You could...

Columbus navigation now reduced to $150

Spoil alert, many will find this boring.

In this thread, I'm going to post some basic info on basic maintenance and parts. This thread will be frequently updated.

CRAFTER 2021 4MOTION
...

Looking good. Is there enough room for wheels to turn when taking sharp corners?

I’ve this one for many years, very reliable and durable.

Hella 12V Optilux Timing Light with Stroboscope : Amazon.com.au: Automotive

If you fix your original post, I’d like to clean up your conversation with Hillbilly, so others don’t have to waste 5 or more minutes of their lives reading it. If it’s ok with both of you. :)

I’m not sure if you still need that information, but this may help. Body builder guidelines - BodybuilderDatabase

Hi Steve, as Lucas_R said, the engine ECU software has to be changed. If your crafter is under the warranty you’ll lose it. You need to block off the pipe from the cooler into the intake.

I’ve used Ctek chargers for a very long time. Recommend and sold them to many customers, though I had a few that have failed, some within the warranty, some after the warranty. Now days I use Century...

Perfect condition, pick up only.
Will hold them till mid next week, then they go to the dump.

I can confirm that my 2019 V6 also regenerates every 300km, regardless how long my trips are (done 10,000km in 2 years).

Not many new Transporters in the country at the moment and if you order now, the waiting time might be at least 6 months but more realistic time is 12 months. There was a new Beach California in grey...

Front and rear bumpers are available till next week for $100 for both, pick up or if you’re down south I can deliver for a small fee.

I’ve had Coopers on Tiguan and Amarok. They never disappointed me and always get at least 70,000km out of them.

I’ll check in my google drive. But, it’s very easy... on left side, kind of next to the battery and bracket attached to M6 bolt from the top.

Change the PS oil every 20,000km and it will last forever.