Search:

Still available

Set the crank before taking off the old belt. Notice the dent in the casting below the toothed crank pulley. When you put the belt on, stick a 10mm socket under it to stop it falling off.
Put the...

Has no purpose on your car. Possibly gets used for Brake Vacuum somewhere in the VW world.

Don't forget about arseholes and opinions. A lot of the former, got the latter. :D That's a quote from a song. Gavin

Hard pedal still indicates no vacuum to the booster I feel. Fix the pipes first. Then consider the vacuum pump if it still persists.

Bad PCVs are a common cause of poor running and lean codes.

I have stock head bolts, so do all the L280 cars I have tuned. I think you'll be good under 300. Also consider that there's modified mk6rs on stock bolts with the like s of TTE 420s etc

Neither on the is12. The IS38 is a different story.

Take off the intake and elbow to check the turbo.

RKX VW & Audi 3.6 & 3.2 Engine Valve Cover PCV Valve Diaphragm – RKXtech make sure you pick the correct version for your engine!

Welcome to the forum. You should start a topic in the transporter forum.

Vagparts. You need a water pump there.

Never seen one personally

I have FP3 in my polo. No dramas on the street. Not been on a track yet. Don't expect any issues though. Would recommend them.

They have always been horizontal in my experience. It began with the MK2 golf GTIs. I have just applied the same rule since. Whether it's a thing, I couldn't say 100 percent. I still do it now...

Pay the extra for 98. The engine will thank you.

:D I just found the number in my list of useful numbers. It is correct. $6 at imparts.

That rings a bell with me.

Nothing wrong with elring. Used plenty in my time. Wouldn't lose sleep thinking about quality, they've been around ages.

Don't forget Sam, the cam cover isn't the only exit for crankcase pressure

Not heard of anyone that fixes them. Although it could be as easy as a dry joint or as bad as a totally rotten circuit board I'd buy from the UK

I have a bit of news. The long awaited brake master cylinders have arrived from Germany. But given it's a bitch of a job to fit. Not sure it will be a quick fit to the car.

Only dramas I have fixed at work on these is the waterpump/charger pulley really. One had a stretched chain.

Not sure I would have one personally but I don't feel they are inherently bad cars.
...

Hey there, I work at Underground Performance in Melbourne. We have some SPM MK5 GTI street cat backs on the shelf. If you want to message our facebook page we can send you a price. These sound pretty...

If Akuma gets his KKL cable going with VCDS lite. I can help further to do a proper scan.

Gavin