Support VWWC - everywhere else

Search:

Type: Posts; User: twin eng, twin turbs; Keyword(s):

Page 1 of 19 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    81
    Views
    24,513

    Great work, it looks fantastic!

    Great work, it looks fantastic!
  2. Sounds like a interesting setup you have in mind...

    Sounds like a interesting setup you have in mind with the LPG and blower. Be sure to post up some pics.

    I have machined out chokes before and your best option is on the lathe because they are...
  3. Your 28mm chokes will limit your power output...

    Your 28mm chokes will limit your power output greatly with your setup i would swap them for 34mm chokes as a starting point and jet them accordingly. No need to go to the 45mm DCOE unless your...
  4. Replies
    13
    Views
    1,398

    NSW How is the dash? Is it cracked... how much for...

    How is the dash? Is it cracked... how much for the whole dash cluster etc and associated wiring to go in a mk1
  5. Replies
    7
    Views
    2,269

    Hows the dash? is it cracked or ok...

    Hows the dash? is it cracked or ok...
  6. NSW Hi, can you post up a pic of the extractors...

    Hi, can you post up a pic of the extractors please, are they stainless or mild? Cheers Marty
  7. Replies
    10
    Views
    4,578

    NZ Cheers ranton

    Cheers ranton
  8. Replies
    10
    Views
    4,578

    NZ Hi, I'm just wondering if by some very slim...

    Hi, I'm just wondering if by some very slim chance you still have this rallye setup?
  9. Replies
    12
    Views
    2,796

    NSW Hi are you in Bathurst or Manly? Im in Orange and...

    Hi are you in Bathurst or Manly? Im in Orange and can cash you up this weekend if you are in Bathurst. Cheers
  10. Replies
    54
    Views
    8,514

    Cheers HaydEn and George, the seats were fun to...

    Cheers HaydEn and George, the seats were fun to fit, the fronts are on the original chassis runners at the back though narrowed down on the inside mount by around 30mm. The front mounts are mk4...
  11. Replies
    9
    Views
    2,072

    That's one tough looking mk1"! looks fast sitting...

    That's one tough looking mk1"! looks fast sitting still.
  12. Replies
    12
    Views
    1,422

    Run a carter rotary fuel pump, much better than...

    Run a carter rotary fuel pump, much better than the facit style pumps that are noisy.. Fuel pressure regulator for 2.5 psi suits weber, dellorto carbs. The factory engine block mounted fuel pump cant...
  13. Replies
    54
    Views
    8,514

    you sure can from what i have heard although i...

    you sure can from what i have heard although i have not checked out a 2E block before so check a head gasket from the 2E on the abf head and make sure everything aligns up especially oil galleries.
  14. Replies
    54
    Views
    8,514

    I ran the dizzy in the original position to run...

    I ran the dizzy in the original position to run the oil pump instead of sourcing a 16v pump as they are different with the 16v pump having the gear attached to it instead of the dizzy. The 8v dizzy...
  15. Replies
    54
    Views
    8,514

    The intake manifold was just off eBay motors, I...

    The intake manifold was just off eBay motors, I don't know what brand though it's the long runner style with better flow than the short runner alternatives. The distributer has been machined down 39...
  16. Replies
    54
    Views
    8,514

    Hey Paul, im coming down to check it out, ill...

    Hey Paul, im coming down to check it out, ill catch you their!
  17. Replies
    54
    Views
    8,514

    Quite true i have spent a fare amount of time and...

    Quite true i have spent a fare amount of time and money though i am dedicated to my dubs!
  18. Replies
    54
    Views
    8,514

    Can do MK1 4 motion, designing the header around...

    Can do MK1 4 motion, designing the header around your engine specs is the way to go!
  19. Replies
    14
    Views
    1,711

    NSW Could you please post some pics of the rear...

    Could you please post some pics of the rear seats? Cheers
  20. Replies
    54
    Views
    8,514

    I made the headers, they are calculated at 781 mm...

    I made the headers, they are calculated at 781 mm long along the center line of the tubing from the valve to the spiked merged collector. Using capacity, cam profile and peak power rpm desired to...
  21. Replies
    54
    Views
    8,514

    The AAD is an 8v tall block found in audi a4's....

    The AAD is an 8v tall block found in audi a4's. Same as 16v ABF blocks, with piston squirters etc 82.5mm bore 92.8mm stroke. No need to block any oil return ports just a straight bolt on for 16v...
  22. Thanks, although i found the sprint just totally...

    Thanks, although i found the sprint just totally frustrating. I gave it a squirt on the highway on my way to the track and saw some smoke on high boost so backed off to 14psi at the track. As soon as...
  23. Thanks for the invite for the photo shoot after...

    Thanks for the invite for the photo shoot after the nats Paul. Sorry i couldn't hang around for it...
  24. NSW What time is the supersprint starting?

    What time is the supersprint starting?
  25. I'll be bringing my MK2, supersprint and show

    I'll be bringing my MK2, supersprint and show
Results 1 to 25 of 454
Page 1 of 19 1 2 3 4
| |