Search:

Type: Posts; User: NAANI?4Motion; Keyword(s):

Search: Search took 0.00 seconds.

  1. Hey mate, no, the front coupling disc was still...

    Hey mate, no, the front coupling disc was still in relatively good condition.
    I stopped the tail shaft spinning by putting the car in gear...that's not much help to you if you have the box out though
  2. To install the 50/50 bung, I had to remove all...

    To install the 50/50 bung, I had to remove all four rear cradle bolts and let it drop as far as it could with all the arms and axles still connected.
    This gives just enough room to get a tool up...
  3. Also fyi; I used my old passenger front cv axle...

    Also fyi;
    I used my old passenger front cv axle bolts to bolt the coupling to the haldex flange because one of the oem bolts had sheared off when I first drove the car and I had to drill it and...
  4. Also a word of warning for the Darkside bung;...

    Also a word of warning for the Darkside bung;
    The O-ring they supplied was the wrong diameter and also the wrong thickness FOR THEIR OWN PART!
    I have been in contact with them about this issue fyi....
  5. Hey mate. The bolt hole centres in the coupling...

    Hey mate.
    The bolt hole centres in the coupling where all on point bar one single hole.
    This tells me that the production quality is lacking in quality control and tolerances.
    So yeah man, average...
  6. 545265452754528545295453054531545325453354525

    545265452754528545295453054531545325453354525
  7. All in and running lads!!! Firstly, the...

    All in and running lads!!!

    Firstly, the tailshaft-haldex coupling…it lined up perfect to the tailshaft, BUT….I did have to drill out the three coupling-haldex flange bolt holes, because the...
  8. Just un boxed this and measured. It all check...

    Just un boxed this and measured.
    It all check out the same for the bolt hole centres and
    the O/D is actually a tad smaller than the gen 1 haldex / Mk4 type

    5444454445
  9. I can kind of understand what you are saying, but...

    I can kind of understand what you are saying, but looking at the image I've posted of my current coupling and how it actually mounts and the slight difference in the newer part number item, I cant...
  10. and this is my coupling as it sits in my 2002...

    and this is my coupling as it sits in my 2002 bora 4motion 2.8
    54383
  11. Gen 1 haldex54376 Gen 1 coupling5437754378 ...

    Gen 1 haldex54376

    Gen 1 coupling5437754378

    Gen 2 haldex54379

    Gen 2 coupling5438054381
  12. update; I got shafted by the Chinese.....I was...

    update;
    I got shafted by the Chinese.....I was told "I uploaded the wrong image sorry" even though it was searched using the correct part number and listed as such.....
    The part they have is the...
  13. Massive thread dredge I apologise... Does...

    Massive thread dredge I apologise...

    Does anyone know if mk2 TT / Mk5 golf r32 front lower arm ball joints work on mk1 tt / mk4 r32 /mk4 bora/jetta ??
  14. yes I agree with this, as it appears to look very...

    yes I agree with this, as it appears to look very similar under the car.
    I have gone ahead and ordered a "JXB Performance" after market billet centre bearing carrier "Mk1 TT/Mk4 R32 Driveshaft...
  15. While we are on the subject, does anyone know if...

    While we are on the subject, does anyone know if the centre bearing carrier is also compatible from the R32 to the Mk4 Bora 4motion?
  16. Thank you both for the replies. I should have...

    Thank you both for the replies.
    I should have been clearer, I'm well aware of the brands out there eg. SWAG/Imperium/Febi Bilstien and the fact that for both part numbers, they appear to be all...
  17. MK4 Bora 4Motion Tail shaft / Prop Shaft parts

    Good evening all, hope you are well.
    I've resorted to creating a profile and asking here because I'm having almost zero luck elsewhere.
    I've just purchased my second Bora 4motion and this one came...
Results 1 to 17 of 17
| |