Search:

Yes, I currently use a Kess v2 clone from AliExpress. It works awesome, does the checksums for you and writes changes in about 15 minutes - Maro had issues with the 2.0 FSI with MPPS v16 (a cheaper...

Update:

Maro and I have been doing a ton of work on this the last 6 months - he has now disabled his NOx system completely as I did through editing the ECU ROM. I have reverted to homogenous only...

An update - I've been working with Maro offline as I have had some trouble posting replies on this forum.

I have managed to get stratified mode working at low load driving without NOx sensor, cats...

Do you get stratified mode when you cruise along at part throttle, if you log your AFRs? Or just at idle?

>I guess intake valves stayed open awhile during compression stroke, deliberately ruining compression in cylinder = reducing power = protecting A/F mix from pre ignition?!


Bingo :)

>However...

When you unplugged all of the sensors and tested, did you also unplug the intake flap actuator?

What version of Windows are you using with MPPS v16? I have a working software for it that works well on Windows 7/XP if you PM me.

I can confirm Kessv2 works perfectly too, in fact on my...

>In my case, engine misfires like hell on 1st cylinder (~80 misfires) and few mis on second cyl but only in warm months. In winter it is clean high idle without misfires, strange ha? After that it...

I am meaning this:

timing retardation, cylinder 1-4 [ °KW ]

There's a separate cam timing if you get knock.

>I've already logged couple of hour test drive for knocks and it knocks only...

The cause of the vastly different airflows I've found are due to knock - if your engine experiences any knock retard (they all do with a factory tune running so lean!) it switches maps to a different...

Hey mate,

I have spent the last year or so trying to figure out how the NOx/stratified system works on our cars (mine is the 1.6 FSI, but the systems are functionally identical).

I'm the author...