50498
The error from obdeleven. It can't be cleared
Type: Posts; User: PeteRepeat; Keyword(s):
50498
The error from obdeleven. It can't be cleared
Hmm why I didn't think of this before but I have noticed the SAFELOCK error come up in my dash since I have had it.
Best think about this some more and read your very informative post in more...
So my drivers door sounds like it's trying to unlock, but it then relocks again without it ever unlocking. The sound is a bit faint on the drivers door compared to whennitnwas working properly. So I...
I have now changed the part that goes in between the radio and dash trim to metal, as the plastic one at only 1mm thick was a little flimsy. Was pretty easy to bend that up. The cradle itself, well...
I like your suggestion for simplicity and most of the functions. All functions but sounding the buzzer only once, although I'm sure this could be done with a timer and scr or transistor with someone...
Seems this thread has become more about telling someone why not to do it, rather than focusing on solutions to something someone may want (be it a hobby or a necessity).
I'm not sure I'm willing...
So far it has worked really well. On occasions I have to make a point to push the phone down onto the usb plug, but usually it just drops in easily. The plastic part that goes in the gap between the...
Makes sense. I've just covered it up now. Don't really see the point of it.
Is there a way to turn the small indicator light that the driver sees in the mirror? I don't see the need for it and as it's the same colour as the blind spot detection light it detracts from that.
...
Oh and also, new phone and I reprint the cradle part only (screwed to the mount). The proclip ones that are adjustable drop in style are bulky and that's where I initially almost bought.
This...
Looked around for mounts that had the usb connection and didn't see any I liked. I contemplated the proclip (or similar) but the mount sits quite low so intrudes on the passenger if they want to have...
Didn't look too bad at all. There was sludge in the bottom of the housing where the pump is but not on the filter. But I could tell the pump wasn't running as it made no noise and threw the fault.
...
So fcp euro delivered really fast. As in 4 days faster than expected.
Installed pump and cleaned the housing.
Reset adaptive values with obdeleven and took it for a drive. First up front wheel...
Anyone care to comment on what software version they have on their MIB2 units? Apart from the rare hang on Android auto, the bigger thing that I hope is available in a software update is the time it...
My unit has android auto and carplay.
Software 0633
Hardware 820
Wondering if I'm best looking at the hacks around for updating my MIB2 system in my golf R 2016. Anyone know if any for Australian delivered golf mk7?
Any ideas what the latest version is? I...
Has anyone replaced their centre resonator with one that also has a valve like the rear ones? Hooked up to the same control.
I've got a mk7 (6 speed dsg) and would prefer to have a quiet car for...
Thanks for the link. Didn't catch what size but it seems 24mm solid is the suggested size by anyone that stated the diameter.
Here's to hoping the old pump has packed it in (which seems likely) otherwise the oil change and filter clean may have been enough. Means I only get under the car once this way, and figured it was...
So I ordered from fcp euro just now. Supposedly should have it it just under a week to a week and a half.
Shortly after placing my order, vagparts replied after a few days, but good they replied....
It gets even better. That mobile number for vagparts says it's disconnected. Two emails and no reply still. Thinking going overseas may be faster
That is old school. They don't seem to list their number in the Web page. Well on mobile I didn't notice it. I'll call the movie shown above though
The haldex pump is the same price with vagparts as importing from fcpeuro, well they're cheaper if tax's are paid. It's the stock levels and no reply is my problem.
They haven't responded to me asking when they may have haldex pump in stock.. So not the same experience for me on first contact. Hopefully I hear from them soon.
I've ordered some haldex oil in so lets hope cleaning filter and oil may fix it... but I realise this isn't likely to solve my problem as the pump has likely died now..
But I will use the oil...