As MIG says fuel rail comes out towards the front and I think in order for it to come out the manifold should come out first. I've had this done for my PCV valve membrane replacement (on AXZ engine)...
Type: Posts; User: Old Navman; Keyword(s):
As MIG says fuel rail comes out towards the front and I think in order for it to come out the manifold should come out first. I've had this done for my PCV valve membrane replacement (on AXZ engine)...
Yeah, it sucks. If the temperature oscillates between warm and cold it could just be the valve. In any case, changing the compressor control valve would be the cheapest option because it would...
Perhaps it's the compressor control valve? You can read up on this in this post here:
Secret air conditioning sequence? R36 2008 (vwwatercooled.com.au)
Well, having tried 3 different climatronic units - 2 x B7 (1 with and 1 without the seat warmer switch), 1 x B6 (which I acquired in the week) I was dumbfounded that ALL would cause the same HVAC...
I guess what I was really hoping for is when I fitted the 'old Climatronic' back things would return to normal. Since that has not happened it puzzles me even more.
As I'm not really getting any meaningful cold air coming through the cabin I thought I'll just swap back to the B6 module and see how it behaves.
After clearing the fault codes the (13701456 -...
I gather this will work with my existing Canbus modules, etc. Not that I have UDS clusters laying around but I might just have to get one if at the end of the day I can't get this working. I guess...
Correct, the reddish display. Thanks for your offer, I might just take you up on that one of these days. Incidentally, I was at Mordi about 2 weeks ago could have popped in for a chinwag. How do I...
I had not tinkered with this coding at all unless it got corrupted 'by itself' but I will try to have a look at those details next time I've got VCDS hooked up.
An update (sort of) - I've had one of the TTY guys have a look at this for me. Despite swapping Fuel Pump Controller (from R36 I think it was), both fuel sender units he was unable to pinpoint where...
https://www.vwwatercooled.com.au/forums/images/imported/2023/09/hand_thumb_uppng-1.jpg
Tried this code yesterday - unfortunately no luck with 'coding rejected - error 31: request out of range'. What's puzzling I have another Climatronic module (which I think is also from B7 but no seat...
Thanks, I'm likely to have a go at the weekend but it's a weather dependent proposition as unfortunately no garage :woot: here.
Address 08: Auto HVAC (J255) Labels:| 5K0-907-044.clb
Part No SW: 5K0 907 044 EA HW: 5K0 907 044 EA
Component: Climatronic H17 1010
Revision: 00003001
Coding:...
Now ... from memory when I did the adaptation it might have momentarily work. I can't be sure as some time have passed since I've done it. As well I've been trying to fix my 'faulty fuel gauge' which...
Unfortunately, though the 'problem' with the B7 unit persists and with A/C on I just cannot get air to come out through the center vents. Mind you I can hear the cold air being blown out somewhere -...
Thanks Don,
Yes, I've saved the 'old scans' so I could get the original module coding. Reading similar (Climatronic related) posts though it seemed it would be a straight forward swap but that's...
I'm still not getting the correct airflow from the B7 Climatronic unit despite many attempts to re-set it. So I'm wondering whether the following errors could explain why it's not doing what it...
Today I've tried troubleshooting this
1 - checking the plug (as below - ignition on) resulted in 0.9V between the connector 2-3 blue purple/white wire and 0V on brown/blue stripe earth? wire....
Thanks - it'll be tonight's reading
Thanks for the information MIG
I'm hoping it's not the 'new' :-) sender unit I installed (seems unnecessarily) about a week ago. I did check it's resistance prior to fitting and it appeared to be...
-------------------------------------------------------------------------------
Address 52: Door Elect, Pass. Labels: 1K0-959-702-MAX2.lbl
Part No: 1K0 959 702 L
...
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 3C0-909-605.lbl
Part No SW: 3C0 909 605 K HW: 3C0 909 605 K
Component:...
My old laptop's battery unfortunately is u/s so it took me a while to hook up the extension power cord to get the scan going. But in any case here it is:
Thursday,03,August,2023,11:07:17:00009...
Thanks guys,
I'll have to hook up the vcds and post any suspicious fault codes - well, the ones which were not previously there ;-).
When you say 'resistance at the cluster' do you mean the 3...