I used them a few times after your recommendation Sunny, as they are just down the road from me and its easy to pick up.
I just had a look at there Facebook posts, looks like multiple issues, one...
Type: Posts; User: Bryn23; Keyword(s):
I used them a few times after your recommendation Sunny, as they are just down the road from me and its easy to pick up.
I just had a look at there Facebook posts, looks like multiple issues, one...
My T6 is a MY17, i used a scangauge that i installed to keep an eye on the Voltage with it disconnected, i was still seeing the T6 do it's Low Voltage range of 12.1-12.6 volts
I think i might...
I tried this a few years ago, as stop/start is just a mess on the transporter, dangerous in my view, if you have one you know what it’s like.
This little trick didn’t work on my T6 132kw euro 5. I...
I can confirm that these do fit on the T6, i fitted these pads and DBA T2 slotted discs late last year, although i haven't done a lot of KM on them, i have noticed a reduction in brake dust, but...
Damm, it's a good thing it wasn't started.
The tank will need to be drained, flushed, fuel filters and fresh diesel are cheaper than injectors.
It may be wise to purge the fuel pump with a...
my T6 Transporter came without a spare, i ordered a hanger and fitting kit from the UK via eBay
It will be interesting to see the pricing on this, the 70mm lift would be handy when you really need clearance.
i like the self leaving function for on a unlevelled site when parked up for the...
Superpro do a adjustable bush that can change the slightly change the camber, the T5 and T6 rear suspension is the same as far as i know
SuperPro Control Arm Inner Bush Kit - Adjustable for VW...
would of taken some work to fit that front panel, but its not my cuppa tea.
Hey Peter, I wish it took 10 minutes to do all that, but at least its all done, and i ill be ready for another adventure when the time comes.
I'll do a dump run today to recycle the oil and...
Nothing exciting for me, but i did a an Engine oil and filter change, a DSG oil and filter change, new cabin and airbox filters
Also replaced the brakes with some DBA T2 slotted and Ceramic Neo...
I still can’t add the link??
But if you look up “ twin-monotube-projekt.de”. You should find it under the T6 suspension options, it is the last option at the bottom.
Their English auto...
I came across this Lift Kit while looking for Crafter Suspension. (Its for T5-T6.1)
Its a adjustable stiffness and height lift kit, so basically a coil over type lift kit.
it is +10mm - +45mm...
I like that tread pattern, hopefully you can get out and see how they handle.
That Pure Grey is the bomb
Congrats on ordering a new van, although the wait times at the moment are hard to deal with.
I was at the dealer last week, 11-12 months on the 4motion Crafter, delivery times are really blowing...
I ordered mine from Blackwoods, i can't recall how much i paid.
I'll measure the jack height today against the tire and the lifting point, and the height of the sidewall to confirm.
I believe that will fit if its deflated, if i recall from previous threads on here.
i've got BFG KO2 LT225/65 R17 sitting in my carrier inflated and its tight, but it fits
Hi Sam,
I use a Omega BST2000 bottle jack, one of the lads on here got one with his Trakka, as the 3200kg GVM doesn't come with a jack.
there is a thread on here that led me to getting one.
...
Ive seen that people have fitted OZ Rally Raids with the same offset and sized rim and no issues.
some earlier euro 5 engines have had issues, but the redesigned part causing it would have been installed on your motor from new as a 2016 model,
I personally would look at the new T6.1 with the...
I always carry these items when going remote
Spare sump plug and filter
A few spare wheel studs
Silicone tape and duct tape
Tire plugs and air compressor and Jack
1 litre of oil for top ups.
...
Hey Sunny,
We have done this trip before from brisbane, and we are currently on our way again up to Darwin in our T6 Camper, although this time it will be via lawn hill along the gulf
Roads...
Sold...
Just thought i'd link the for sale post for the new Darkside Oil Cooler kit i have for the 132kw CFCA BiTurbo engine which was fitted in the Later T5's and Early T6 models
Moving to a Crafter, and...
Hey I thought id post this New Darkside Oil Cooler her first before i list it on Gumtree.
I brought a new Darkside CFCA Engine Oil Cooler Kit for my 132kw T6, last last year, but i never got...