Hi all,
I have just bought a 2017 Golf MK7.5 110TSI manual and it feels like I'm riding really high above the road.
Also, the shocks give a beautifully compliant ride,...supmtious actually !
I...
Type: Posts; User: Fzs1000n; Keyword(s):
Hi all,
I have just bought a 2017 Golf MK7.5 110TSI manual and it feels like I'm riding really high above the road.
Also, the shocks give a beautifully compliant ride,...supmtious actually !
I...
The Gold label is VW approved and the Green label is Japanese car approved ?
Hi all,
i've got a stock 4Mo and am wanting to know if there is a chip for these or flash or something to get a few more ponies.
i'm in Sydney
i need to replace my power steering line and was wondering about the flexibility of fit for other MK4's lines to suit the 4motion.
For eg. this is for Auto 4 cyl models:
Febi Bilstein Steering...
PowerSteering Hose for 4motion req'd
Hi all,
Is it possible to swap the internals from later style (with end cap) O2M to earlier one (no end cap)?
is it a big job? special tools? or really straight forward and not a specialised...
found one
MODERATOR pls delete this wanted listing
Hi,
GEARBOX 02M MK4 2004 Bora 4motion/R32 urgently needed
located in Sydney or can arrange interstate freight
I hadn't removed slave or bleeder assembly only loosened nipple after new cmc went it.
If I do the loosen nipple clutch down and tighten and so on the tubing shows no air however pedal still to...
i'm starting to think the Clutch Bleeder Assemble is to blame, the plastic body where the nipple into.
The matal hex part the nipple screws into which is connected to the plastic body appears to...
I tired this a few times to no avail.
Could be the O ring has fallen off the hard pipe to cmc?? although it seemed to fit in firmly and clip snapped on, I'll have to remove to check.
The O ring...
as far as I know the only bleeder is at the slave and that where I bled, down below the battery
Hi all,
Oh, hoping some of you might be able to give some advice!
I installed a new Clutch mc on the Bora 4motion and bleeding seems be be releasing a huge amount of bubbles into my clear...
it is a 4Motion so i have to have all wheels off the ground I guess
Hi all,
I want to remove the FL drive shaft so I can put on a new CV joint.
My Q is: as I'm rotating the drive shaft to get access to the gearbox end bolts, being a 4Motion, can the back wheels...
GOD-DAMMIT someone must know the answer to this question to help out a carport hack like me
Hi all,
As the title reads: What size Triple Square Driver for 4Motion cv drive axle to gearbox bolts?
I've been sniffing around, either 8mm or 10mm can't pin down which one though!
TRW pads are extremely sweet
Oh dear i didn't put one of the spring back in properly - dopey
Hi all,,
Does anyone know if the V5 Bora front brake pads are the same as the 4Motion - cause I just put the V5 pads on my 4Motion and some strange things are going on!!!
2nd ask to Bilstein asking for part numbers,,,,sent 7pm last night, no answer yet - bloody hopeless!!!!
info@bilsteinworld.com.au
they should put the word no in-front of their email...
140k. Fronts are Bilstein 22-145550 (VNE-E555) haven't looked at the rears yet
Yes point taken however I would expect better from the cheap end of a premium brand.
I just find it hard to believe the OEM's were that soft. I was never in a 4Motion when it was new but I'm...
I've lost respect for the brand and after a question on the Bilstein Aust website no one has gotten back after a week asking if the part numbers from my shocks are the correct. I gave them all...
WOW now thats really great that a general auto store like SPA has something that actually fits VW (aside from oil!!) great tip :cool: