Results,
There was a virtual fire behind th rpm dial, so much black & crispy just under the large 'capacitor ,top area of rev counter blacking around the area. The smell is strong and WHEN this...
Type: Posts; User: Bill Lee; Keyword(s):
Results,
There was a virtual fire behind th rpm dial, so much black & crispy just under the large 'capacitor ,top area of rev counter blacking around the area. The smell is strong and WHEN this...
The dash was working after, properly for 1500km, I was in heavy rain during a night and wasnt working in the morning. It ran over the battery ONLY that I can see maybe the covered ecu, no holes...
Hi..(again)
Ive just had my engine removed by mechanics.
They put it back together. Thats enough about that.
My dash board the other rainy day mornin was blank of digital and needle operatives. It...
WARNING.
Just to fill in a blank, the mechanic who fixed it said I wouldnt have got it off because the main transmission around the plate wheel must come off first...contrary to the haynes book that...
It too .....has no effect
Still cant get it off, went to a mechanics and he said is it a puush or pull clutch. Behind the black plate to take off a cir clip.
The bolt found is one of a few holding a shield on.
So today im...
Ok, I have found a quote!
(And ive been at it everyday the neighbours are offering tools)
Ive pulled and tapped wedges to no effect, I looked around the back of this and actually undid that exact...
No....no.. it is not over yet.
The trans is firmly stuck, after own weight wedge pressuring , angled prying and pulling away from the engine with taught chain (thats a fair pressure) hitting with a...
This ref is as close as i can find, I dont think there's any, maybe on other models. Either way tomorrow I hit it hard.
Something Ill walk away with, I use a engine support beam, pack up and rebolt...
Not sure....a pressed impression of the hole in that area and is a blind rounded empty. A bolt the other side of the tranny MAY go through to the other side??? Block side? I took photos but...
Ive a t4 97 and am replacing clutch, intriguingly no-where illustrates the position of this last bolt (above drive shaft.?) Maybe mine doesn't have one, whatever the reason the tranny wont seprerate...
I know, I'll start again.
My t4 transporter started sounding like it had fuel contamination when I left the fuel station. The vw specialist says the leads were the wrong way round???
I used vcds...
The only added thing to mention is somehow the leads to the distributor somehow got mixed up and operated the vehical ,would that have something to electrical disturbance?
The vw dealer has looked...
I think I fixed it last time with adaption of the immo then access is given so I adaption the engine to immo.
I can't find threads on the subject that solves why it is.
Making sure it earthed is...
Hi, I would like to know how to fix this.
I can't get into my ecu where I did before.
It reads the first numbers , sometimes the second set, but not all anymore. Messaging me "too many...
Well, at least you get the word trailer with yours, I'd never heard of a TURNTABLE. Like some rotating train bridge.
I posted an engineer associated to the licensing of these things and he hasn't...
Gosh were has time gone, the choice for this was based on the possibility that it could be possible in a special configuration (which I've forgotten!) and fit it in.
Realistically it...
My 97 transporter needs 2 alternators and I have a plate to mount to the engine, but it also has a MASSIVE airconditioner system (cos I like it freezing) but can't figure were or how to mount all...
Yes that's the style I'm left with. Originally I wanted an A-frame for a temporary tow, then the wheelbase had to be moved for a trailer/turntable setup, rego being the reason. I might go back to the...
Well this is the thing isn't it, what, can I do. To do that comes under the existing trailer requirements and passes. I build?
Maybe the engineer can find a good reason and I can use the whole...
.....that's the turntable. (Ideal they say)
I don't know why the existing wheel base isn't good enough, conversion could be a little better for this country ....I'll just have to settle for the...
I just happen to have another t4 to play with and I'd like to make a trailer (like those professional t4 drivers have ,a shiney half vehical) and I asked the law here in tasmania and they said to...
OH, I've been right round the mill and STILL have no running vehical. A basic finalization is that I can't identify the exact cause. This being that it looked more like the starter plastic planetary...
..and that's great, or do you mean not great?
This isn't..! "Too many Excessive com errors to continue" reading the ecu, no fault codes found for a removed airbag and no light...??thats odd and...
That's good.
Another thing the ecu has a different part number..
044906024e
Drop the e for my original, will that effect us much?