Thanks, I spotted my mistake.
Type: Posts; User: arek_p; Keyword(s):
Thanks, I spotted my mistake.
These are for the front. The post and my question is about the rear flex disc.
Thanks @beale187 - Febi Bilstein 19528 is 400 pounds plus shipping
Have you had a look at the Shifter Cable End Catches?
Also, how tight did you do up the 10mm bolts connecting the flex disc to prop shaft? I can't find it in the Bentley manual. There's not much on the web. I've seen 40Nm + 45° and 50Nm + 90°.
@NAANI?4Motion, I'm currently struggling to replace the front flex disc and if I need to drop the prop shaft, may considering also doing the rear.
The link to alibaba you posted seems to be the...
I replaced only the gear stick bushing - made a big difference.
Also using Castrol Edge 5W-30 in my V6 Bora 2003: compatible with VW 504.00 and VW 507.00
But I wonder if an older engine (over 200k km) needs a different oil?
...
Did you replace the prop shaft flexible disc / donut at the front as well?
How did you stop the prop shaft from spinning?
I tried doing this when I had the gear box out but gave up as me and a...
Great choice. Nice to drive.
Based on my experience after buying a LUK clutch kit, if you buy parts overseas likelihood is no one will fit them for you locally.
I ended up fitting the clutch myself (as well as lots of other...
Alex, did you ever get this done?
Sent from my Pixel 4a using Tapatalk
Wondering if anyone knows if part numbers 021 103 051A and 021 103 051C are interchangeable? My engine code is BDE and 02M transmission.
The first link shows:
021 103 051C VAG
021 103 051A VAG
...
I have the one in the link to souped.com.au
It doesn't reset the fault code after disconnecting the air bag
It does read and reset errors on wife's 2015 Fiat 500X
I have a 2003 Bora V6 4 Motion manual with 245k km
I'm looking at replacing the clutch with the LuK RepSet DMF Clutch Kit (600 0181 00)
This comes with: Central Slave Cylinder, clutch
Clutch...
On weekend replaced the ignition coils and dog bone. Was going to do the oil filter, but didn't have a 26mm socket - next time.
47519
Yes they did Graeme. I took them out to clean. Thanks for info, might install power socket.
Took rear bumper off to empty the sunroof water drain hose nipple - glad I did. Take out the tail lights, few screws and slide off.4746847466
In process found 2 air vents on the driver's side,...
Preventative maintenance - this failed on my previous Bora and I needed towed.
On weekend finally replaced the still original steering ignition lock cylinder. Persevered with chisel & hammer for the shear head bolts and eventually got them loose.
46883
46884
Now may...
Finally got there on the weekend with chisel & hammer! thanks for encouragement
.46885
What a set of coincidences! Do you know which scrap yard?
I wanted to replace the ignition lock cylinder and switch today. Found some good videos and here. I used the old screw driver and hammer trick but couldn't undo the shear head bolts. Any suggestions?...
no need, see the video links I included
7 hours to do all 4 corners including clean up on my V6 Bora. First time that I've anything like this. Bosch at front and Febi-Bilstein at rear. Just followed youtube videos (front & rear) and all's...