Great work, it looks fantastic!
Type: Posts; User: twin eng, twin turbs; Keyword(s):
Great work, it looks fantastic!
Sounds like a interesting setup you have in mind with the LPG and blower. Be sure to post up some pics.
I have machined out chokes before and your best option is on the lathe because they are...
Your 28mm chokes will limit your power output greatly with your setup i would swap them for 34mm chokes as a starting point and jet them accordingly. No need to go to the 45mm DCOE unless your...
How is the dash? Is it cracked... how much for the whole dash cluster etc and associated wiring to go in a mk1
Hows the dash? is it cracked or ok...
Hi, can you post up a pic of the extractors please, are they stainless or mild? Cheers Marty
Cheers ranton
Hi, I'm just wondering if by some very slim chance you still have this rallye setup?
Hi are you in Bathurst or Manly? Im in Orange and can cash you up this weekend if you are in Bathurst. Cheers
Cheers HaydEn and George, the seats were fun to fit, the fronts are on the original chassis runners at the back though narrowed down on the inside mount by around 30mm. The front mounts are mk4...
That's one tough looking mk1"! looks fast sitting still.
Run a carter rotary fuel pump, much better than the facit style pumps that are noisy.. Fuel pressure regulator for 2.5 psi suits weber, dellorto carbs. The factory engine block mounted fuel pump cant...
you sure can from what i have heard although i have not checked out a 2E block before so check a head gasket from the 2E on the abf head and make sure everything aligns up especially oil galleries.
I ran the dizzy in the original position to run the oil pump instead of sourcing a 16v pump as they are different with the 16v pump having the gear attached to it instead of the dizzy. The 8v dizzy...
The intake manifold was just off eBay motors, I don't know what brand though it's the long runner style with better flow than the short runner alternatives. The distributer has been machined down 39...
Hey Paul, im coming down to check it out, ill catch you their!
Quite true i have spent a fare amount of time and money though i am dedicated to my dubs!
Can do MK1 4 motion, designing the header around your engine specs is the way to go!
Could you please post some pics of the rear seats? Cheers
I made the headers, they are calculated at 781 mm long along the center line of the tubing from the valve to the spiked merged collector. Using capacity, cam profile and peak power rpm desired to...
The AAD is an 8v tall block found in audi a4's. Same as 16v ABF blocks, with piston squirters etc 82.5mm bore 92.8mm stroke. No need to block any oil return ports just a straight bolt on for 16v...
Thanks, although i found the sprint just totally frustrating. I gave it a squirt on the highway on my way to the track and saw some smoke on high boost so backed off to 14psi at the track. As soon as...
Thanks for the invite for the photo shoot after the nats Paul. Sorry i couldn't hang around for it...
What time is the supersprint starting?
I'll be bringing my MK2, supersprint and show