Search:

From any of these 7458, 7605, 7924, 9153, 9239, 9702 to 9970 or above.

Not so, the TPI is still marked as no production change at 12.12.12..

For the record and Topic Title update... TPI is now 2021062/12, Dated:12.12.12.. Minor accounting changes before anyone asks. Clip is still the same.

TPI 413101/19 27 July 2012........
"The glass must be clear about 30 minutes after switching on the lamps. If this isn't the case or drips run down the inside of the glass, check the lamps for...

I would reckon thats not normal. That left headlight has a leak somewhere. Condensation is tooooo heavey for normal atmospheric breathing due the headlight being on.

Light misting like in the...

This is not the usual dash switch cancel when it repeats warning randomly for no apparent reason. Resetting with the dash switch after a tyre change or puncture or tyre inflation or geometry change...

Sometimes you need to do "Basic Setting" on the TPMS and thats why the dealer wants the Golf in the dealership. Its because the ESP unit needs steering angle and tyre info. Until it has the data,...

Not that I am aware of a bulletin. None has ever been issued. Parts "Alert" not sure.

ETKA - Golf 6 CAVD engine is the revised spark plug 03C905601A. It maybe the dealer had servicing stock...

Castrol Website Aus. is CASTROL EDGE PROFESSIONAL LONGLIFE III 5W-30 for Golf GTi 2009 - 2012

Now you have described the idle speed in more detail, thats not the plugs imo. More like an injector with a wrongly directed output pattern due to blockage. Had one with me to look at like that...

OK, this is what the old (top left) and new replacement (bottom right) look like. Same apart from the gap is reduced from 0.90mm +/-0.05mm variance to 0.80mm. VW's gap setting is specified as...

Are you sure this type is fitted?..... odd???

Turbo doesn't just switch on at 3,500rpm. It is boosting all the time just not at full limit. So it is always spinning with very mild boost at even very low rpm. If you want to know how, then the...

To remove the spark plugs, the coil packs have to be removed using the Coil Pack Removal Tool T10094A. What ever is the equivalent of £35 UK prices to the A$.

Without it, it is very difficult as...

ACC does not change the ride height. Are you sure the chassis is not folded?

More inclined to have the Scirocco on an body alignment jig.

Suspension ACC J250 is the back left on the rear top...

Can be if the cylinders have gone oval. New pistons and rings will only temporarily stop the sump oil splash passing the rings. Oil consumption will return to the same levels once the rings bed in....

Its a www myth about running in at the factory. They whack the engine on the dyno on the factory line for about 15 seconds total, slam the engine to high revs more or less instantly, if it runs and...

He means the Mirror Control knob on the driver's inside door car panel, forward and above the door internal grab handle. You must set up the reverse mirror position while the knob is to the left...

Fairly straight forward if you have mechanical familiarity with servicing a car, no special tools other than Torx set and hose clip pliers but its more involved then the 1.4's and 2.0 GT's.

Oil -...

If they replaced the Camshaft Positioner, thats the VW official solution. I chose not to solve the noise with my engine with the Positioner change. Did this instead...

Don't think there is masses of gunk around considering the valve size and oil feed bore sizes. Just seems the stiction occurs with the Solenoid Control Valve affecting its correct movement.

When...

Yes its one way but as with my October 2009 build, the DSG may not be targetted for 37G7 so it may not be accepted as part of 37G7 worldwide campaign and therefore warranty costed.

Bulletin 2026473/2 is October 2011. So its missing if you have the noises. Reprogramming of the DSG ECU is required to recognise rough roads like cobbled surfaces. Results in quicker gear changes...

If you are going to do it yourself, be warned the coil packs are in tight. Not to be levered out with a screw driver as the coil electronics can be damaged as a lot of force is needed, even if...

I suspect you have the cold start misfire problem. Its the one not covered by the first issue of 24s4 which you have loaded, ie. map 5860 in your Address 01 dump.

Two options:

-----------
...