I installed a new transmission mount and snapped two bolts (#3 in the diagram).
Attachment 53494
The Bentley repair manual mentions that the bolt is to be torqued to 100nm. I didn't even get to 70nm before it snapping. It was seated correctly and I had hand tightened it prior to using a torque wrench.
I've ordered some new replacement bolts and will be repairing the threads but I was wondering if I either read the manual incorrectly or the torque figure is different.
The car is a MK4 1.8T with a 02J transmission.
Any help is appreciated, thanks :)