FS: various parts from mk3 build (mk3, mk4, passat)

various parts from my Vento build.
Some in Bairnsdale, some in Ferntree gully (melbourne)


Passat vr 288mm carriers $50
US Vento (jetta) number plate tub $80
http://www.vwwatercooled.com.au/foru...hs4oyigy-1.jpg
Vento tail lights, internal section only $5 each.
Working vr sunroof, have booklets from factory. $100
Vento 2Lt 8v engine, never started since owning, had auto pulled from it to be repaired and never reinstalled. (Located in bairnsdale)
Vento 2Lt radiator support panel, rad, fans (located in bairnsdale)
Vento front lip $10
2lt air box $10
Vr golf glass windows (btown)
2Lt down pipes $20
Mk3 Steering wheel, usual worn look (btown)
Mk3 Drivers air bag (btown)
Mk3 Passenger air bag (btown)
Mk3 Auto shifter surround. (Btown)
Mk3 2Lt coolant hoses:
Interior plastic trim $5 each
Mk3 vr golf black hatch $50 (bairnsdale)
Vw mk3 vr dash

Rockwood Chicago Amplifier 400w 2 channel, 2 Ohm Stable 25$
Autotecnica steering wheel and boss, boss part number is 415alu $50

Mk3 sunvisors $5 each
mk3 2lt Auto cluster $25
mk3 door rub strips (have 3 of 4 left)

Shagged mk3 steering wheel
Mk3 drivers air bag
Golf headlight covers
Grey sunvisors with mirrors left and right
Strut brace
1x vr6 stock Bbs wheel
Bike rack
Left and right mirror heated and electric. Complete, one unpainted, one Dragon green.
Charcoal canister


VR6 manual pedal box
VR6 subframe and steering rack with tie rods
2xVR6 hatch with wiper/motor etc. one blue, in melbourne. second is black, in bairnsdale
VR6 fuel pump
VR6 air box
VR6 wiper assembly (motor and mechanism, no blades or wiper arms)
Set of door handles
Vr6 down pipe
Vr6 intake manifold - painted wrinkle black
VR6 steering column
Seat front lip
mk3 black sun visors
Smoked indicators/dummy fogs FK/Depo brand, basically new in box, only removed to view

Some pics of what's laying around.
All doors minus rear drivers
Hatch and bumper
Sunroof
All 4 door cards
2Lt brakes, beam and suspension should be available now pending what the scrap metal need left on

Everything pictured on the grass and in the engine bay
http://www.vwwatercooled.com.au/foru...iy2ppphk-1.jpg
http://www.vwwatercooled.com.au/foru...qwaraigr-1.jpghttp://www.vwwatercooled.com.au/foru...hbgzm7xt-1.jpghttp://www.vwwatercooled.com.au/foru...n3fqaiie-1.jpghttp://www.vwwatercooled.com.au/foru...10yxuuyy-1.jpghttp://www.vwwatercooled.com.au/foru...zabauxvg-1.jpghttp://www.vwwatercooled.com.au/foru...76prccx3-1.jpg

Will be in bairnsdale til the 31st of Dec, so let me know if you need anything and I'll try to bring it back

Http://s660.photobucket.com/albums/u...s%20for%20sale
Here's all the pics I have of the bumper plus some other stuff

Iv got some brand new mk3 parts from a guy I work with to sell on his behalf who sold his golf many moons ago.
Bendix brake pads, does both sides, they are stamped db 1407 inner bendix 60287642 and db 1407 outter bendix 60287642
Need to confirm how much he wanted but I think it was $60
Strut top bushes and bearings, will do two struts. 1j0412249 for the bearing. 357412331a rubbex for the bush.
Need to confirm how much he wanted but I think it was $60

Quote:

---

Originally Posted by dylan8

Hey Steve.
Heatercore and door lock knob no worries, have a google pic or something of exactly what auto shifter parts you want? they should all still be there.
scuttle have the rubber strip missing as usual, rest of the plastics should be fine.
tail light gaskets are gone Im pretty sure.
VR dip stick and breather parts are all in the vento or toast

---

So do you have a good auto gear stick handle?

I posted a pic and haven't heard back.

Thanks mate.

Got a set of genuine mk3 golf headlight covers (believe nos other then the dust)
Pair of mirrors (i believe one is brand new)
Shagged vr steering wheel and airbag (might be good to retrim)

bump.
lots of bits sold
lots in the bin
lots still hanging around.

big bits like door rub strips, air boxes, steering wheels would be nice gone

Strut top bushes and bearings, will do two struts. 1j0412249 for the bearing. 357412331a rubbex for the bush.
Need to confirm how much he wanted but I think it was $60 ...will these fit a Mk1/2 Cabrio?? 1989?

Hi,
Have you a bog standard Mk3 steering wheel?
The top of the wheel usually goes from UV, what's it like there?
The steering column shroud would also be of interest.

Quote:

---

Originally Posted by karmen

Strut top bushes and bearings, will do two struts. 1j0412249 for the bearing. 357412331a rubbex for the bush.
Need to confirm how much he wanted but I think it was $60 ...will these fit a Mk1/2 Cabrio?? 1989?

---

no idea sorry, they fit the struts, not sure if they fit the car

Quote:

---

Originally Posted by yowie

Hi,
Have you a bog standard Mk3 steering wheel?
The top of the wheel usually goes from UV, what's it like there?
The steering column shroud would also be of interest.

---

have two, one was pretty rubbish, ill check out the second.
dont think I have the other cam shell anymore

Both oem steering wheels are rubbish. Material is warn.

Also have the below
Autotechnic steering wheel
Shagged mk3 steering wheel
Mk3 drivers air bag
Golf headlight covers
Grey sunvisors with mirrors left and right
Strut brace
1x vr6 stock Bbs wheel
2lt air box
Amp
Bike rack
Left and right mirror heated and electric. Complete, one unpainted, one Dragon green.
cluster
Charcoal canister

VR6 manual pedal box
VR6 subframe and steering rack with tie rods
2xVR6 hatch with wiper/motor etc. one blue, in melbourne. second is black, in bairnsdale
VR6 fuel pump
VR6 air box
VR6 wiper assembly (motor and mechanism, no blades or wiper arms)

Seat front lip
mk3 black sun visors

http://s238.photobucket.com/user/_re...a/DSCF7167.jpg
http://www.vwwatercooled.com.au/foru...6chombw6-1.jpg
Have a lip similar to the above

Ooh I'll grab the sun visors if they're still around [emoji51]


.:R32 MK5 3DR Manual
MK1 Golf (Swallowtail) 3DR Manual

Yep still here. Flick me a message

Have a spare set of black sun visors from a mk3 too

VR6 manual pedal box
VR6 subframe and steering rack with tie rods
2xVR6 hatch with wiper/motor etc. one blue, in melbourne. second is black, in bairnsdale
VR6 fuel pump
VR6 air box
VR6 wiper assembly (motor and mechanism, no blades or wiper arms)

Gear box sold,
front and rear bumpers sold

VR6 starter motor

Bumping

bump.
check first page for revised list

bump.
check first page for revised list

any of these still available:
rear passenger door regulator available?
PCV?
BBS wheel centre covers?

Quote:

---

Originally Posted by DBT_98vr6

any of these still available:
rear passenger door regulator available?
PCV?
BBS wheel centre covers?

---

Rear passenger door regulator would be available still but is in bairnsdale so I'll have to grab it next weekend.
Pcv is/Was toast.
No Bbs caps left