Results 1 to 2 of 2

Thread: 00016 'A' Camshaft Position Actuator Circuit/Open (Bank1)

  1. #1
    Join Date
    Apr 2021
    Location
    Perth
    Posts
    8

    00016 'A' Camshaft Position Actuator Circuit/Open (Bank1)

    A few weeks ago I changed the oil in my 200k km 2014 Tiguan, at the same time I replaced the Upper Timing Chain Cover Gasket 06H103483 and Timing Chain Cover Gasket for Magnet N91000101 as they were leaking oil. The car then had some sensor issue which I fixed by removing the oil filter and refitting the cable to the sensor behind it.
    Yesterday it started to run terrible, after connecting the OBD scanner, I found it had a misfire on cylinder 1, when I removed the coil pack for cylinder 1 there was petrol in it and around the spark plug, so I replaced all the spark plugs and the car ran fine, then today I have the ECU light on, reading "00016 'A' Camshaft Position Actuator Circuit/Open (Bank1)", no other codes. I am wondering if I moved some cables in the process that are now throwing this error, the car drives fine.
    Any recommendation on where to start?

  2. #2
    Join Date
    May 2005
    Location
    Melbourne, Mexico
    Posts
    8,956
    Users Country Flag

    Cam magnet not plugged in or failed.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |