Hi All,

So today I installed my sat-nav, which went well, considering i've used a screwdriver maybe twice in my life before . Actually I lied, i accidently seperated the trim and the central air vents which led to a series of problems which ended up with a few parts down under the head unit (unreachable and unseeable) and the central vents taken out. I guess at this point I will have to take it to VW to re-install these vents (thus making my DYI install almost utterly useless except for the satisfaction of doing it myself).

On top of this, on start-up...It asked me for the 4-digit pin, which I immediately realised I had left it stuck on top of the RNS510 unit.
So, dismounted everything again and put it all together, by this time it only took me 15 minutes afer I had become confident with the clips.

I became SO confident that I forgot to re-attach the sensor cable, so again had to undo a few clips and plug it back in.

Upon completion I realised that the satnav hasn't got Aussie maps..I went back to the ebay auction and realised that indeed it did not come with the Aussie maps, not sure why I thought it would come as standard as it was from the U.K.

Is there anyone in Melbourne that would be able to help me out with the map install and the Vag-com coding? I'm willing to pay, just want to complete everything and have my car in fully automatic mode .

Cheers,
CSR