Weird title i know, thanks for having a look...

For anyone who knows what they are talking about it will quickly become apparent that i don't.

Basically i am trying to hook up a DB Innovate AFR gauge to an OT-2 Innovate Wifi Unit. Firstly can someone put me out of my misery if there is no chance in hell that this is possible.

Secondly i hope the info below my confirm if its do-able and what i need to do it.

Thirdly if someone can just fix it for me i'll pay them cold hard cash!

Reason i want to do this is so i can hook up my OT-2 unit to the Audi 8P S3 and hook up a DB gauge I already have spare. I like the gauge as its red like the audi lighting and the bezel matches a spare Podi boost gauge I have an will wire up in an OSIR pod, all shown below.









I know i can buy a MTX-1 or XD-16 gauge that will be plug and play but i don't like the look of the gauge so its the last resort.

As far as i know i need to change the serial output from the OT-2 to an analog 5v input for the DB gauge.

I hope the following info means something to someone...

http://www.innovatemotorsports.com/s...eriallog-2.pdf

http://www.innovatemotorsports.com/s...OT-2%20SDK.pdf

http://www.analog.com/static/importe...D5541_5542.pdf

Innovate Serial Protocol 2 (ISP2) specification (preliminary)

1. Serial Interface Settings
The LM-1 serial interface is set to
8 data bits 1 stop bit no parity 19.2 kBaud.
2. Serial Protocol Format Version 2