Page 5 of 5 FirstFirst ... 345
Results 41 to 45 of 45

Thread: MK3: ADZ to AMK to BWS(R36!)

  1. #41
    Join Date
    Jun 2011
    Location
    Newcastle
    Posts
    2,868
    Thread Starter

    Couldnít resist an ITB test fit whilst I had the intake manifold off to do a carbon clean.





    Been fairly quiet, remade brake lines again - this time in stainless steel line. Bled the two systems and all good!

    Struggling to get the rear side glass out without smashing them.


    Sent from my iPhone using Tapatalk

  2. #42
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,462
    How much space the rad and panel? looks to be a fair way back from the end of the chassis rails

    assume remove the rear windows involves trying to hack the sealant from the inside of the car?

  3. #43
    Join Date
    Jun 2011
    Location
    Newcastle
    Posts
    2,868
    Thread Starter
    Quote Originally Posted by dylan8 View Post
    How much space the rad and panel? looks to be a fair way back from the end of the chassis rails

    assume remove the rear windows involves trying to hack the sealant from the inside of the car?
    Plenty of room, it would work with stock radiator. The closest point is the cylinder one trumpet to headlight, thereís only about 20mm there - not sure how Iíll make an air duct/airbox for it in the future though!

    Yeah Iíve hacked it out, just needed to be more aggressive with the pry bar to get a wire through the fully cut it - which I was able to do yesterday with a bit of patience.


    Sent from my iPhone using Tapatalk

  4. #44
    Join Date
    Oct 2007
    Location
    Bairnsdale & Ferntree Gully, Victoria
    Posts
    7,462
    Quote Originally Posted by HaydEn View Post
    Plenty of room, it would work with stock radiator. The closest point is the cylinder one trumpet to headlight, thereís only about 20mm there - not sure how Iíll make an air duct/airbox for it in the future though!

    Yeah Iíve hacked it out, just needed to be more aggressive with the pry bar to get a wire through the fully cut it - which I was able to do yesterday with a bit of patience.


    Sent from my iPhone using Tapatalk
    headlight delete will sort that.

    yeah right. guess there was no plan on them ever being removed, bit of structural glass

  5. #45
    Join Date
    Jun 2011
    Location
    Newcastle
    Posts
    2,868
    Thread Starter

    Tinted lexan windows are my new favourite thing. Canít even tell they arenít glass (other than the rivets) for example the last few external photos of the car have been with the lexan windows in too.




    Sent from my iPhone using Tapatalk

Page 5 of 5 FirstFirst ... 345

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |