Support VWWC

Results 1 to 10 of 25

Thread: DIY Tutorial: Refabricating your overhead board.

Threaded View

bboyskidz DIY Tutorial: Refabricating... 23-09-2007, 01:55 PM
ScienceVR6 I did my bro's VR coma dore.... 23-09-2007, 02:20 PM
bboyskidz here it is!!! simple solution... 23-09-2007, 10:58 PM
bboyskidz Now i'm not sure if this is... 23-09-2007, 10:59 PM
bboyskidz Then I went to the local... 23-09-2007, 11:00 PM
Previous Post Previous Post   Next Post Next Post
  1. 23-09-2007, 01:55 PM #1
    bboyskidz's Avatar
    bboyskidz is offline Volkswagen Enthusiast
    Join Date
    Nov 2006
    Location
    Central Coast, NSW
    Posts
    670

    DIY Tutorial: Refabricating your overhead board.

    yeh so i did this over the weekend... i've taken photos and such - i'm in the middle of doing a write up.

    i'd post it up now but i've got to do some other stuff... (i.e have lunch with the girlfriend - apparently i've been spending too much time with my other girlfriend - the car )

    keep an eye on this space for more info!!!

    edit: here is a list of materials that I ended up using
    • Philips head screwdriver
    • Scissors/razor blade
    • Big scrubbing brush
    • 2 metres of 148cm black fleecy cotton
    • 2 Cans of spray adhesive (used 1 1/2)
    • 2 Cans of black vinyl spray (only used 1)
    Last edited by bboyskidz; 23-09-2007 at 11:12 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

| |