Results 1 to 1 of 1

Thread: Polo 9N3 + audi S3/Golf Mk 4 bits

  1. #1
    Join Date
    Sep 2013
    Location
    nsw
    Posts
    3,211
    Users Country Flag

    Polo 9N3 + audi S3/Golf Mk 4 bits

    - Polo Gti 9N3 Whiteine 22mm FARB includes Whiteline 22mm bush kit for above bar part# KSK087-22
    Whiteline BWF18Z
    $175

    - Polo gti 9N3 K03s/K04-001 dump pipe custom stainless 3 inch. Just the straight down pipe section off the turbo to the cat position. Will basically halve the job if you are going to get a front section built as the tricky bit is already done OR get it welded straight onto your existing factory cat for the cheapest possible stg 2 ready exhaust.

    - Polo or Golf K04-001 genuine borg warner original turbo. not a knock off. unfortunately the cold side has a damaged blade. BUT if you have a K03s you can take its compressor wheel and compressor cover and put them straight onto this hotside. That'll give you a K03s/K04-001 hybrid which is the biggest OEM wheels in a K03 frame turbo for a 1.8t 20V and will bolt straight back in.

    - Polo intercooler pipe work from turbo to front mount entry. Includes black ceramic coated stainless steel OEM cross/top pipe, aluminium 2 inch replacement of the failure prone <2inch plastic under-crank pulley pipe and also a 2 inch aluminium pipe that continues forward and bends 90 degrees around to the front where a FMIC would sit. Again, will halve the pipework job if you are doing a custom front mount.


    PM/message for pics
    sam
    Last edited by sambb; 24-07-2022 at 11:56 AM.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |