MK4 R32 Parts for sale - interior and mechanical

**RolfGolf** · 05-02-2015, 10:28 PM

Ditto - interested in front spindles.

**SamS3** · 10-02-2015, 11:43 PM

I presume this isn't happening. No worries. Will source another...

**drucejnr** · 11-02-2015, 07:35 AM

Interested in the passenger side weather strip that sits in roof

**tinto** · 14-02-2015, 10:09 PM

apologies again guys - had a hell of a week at work and only just had the chance to get the parts out of my boot today to snap a photo.

here's the front end suspension stuff I have.
More than likely will be broken down further from what you see here (springs and struts in particular) so the suspension can go separately.

sway bar

Tomorrow is looking clear so some other stuff (door cards, wobble bolts and rear suspension / dampers) will get photos too.

**tinto** · 15-02-2015, 05:29 PM

As you can see from these photos - both boots are split on the drive shafts at the gearbox end. One of the joints has been separated from the cup / bearings.
Shafts themselves look fine, but they aren't a quick switch out / bolt on at the moment.

The front knuckles look great - I'll be separating those from the shafts and suspension parts shortly.
Happy to bundle the hub in with knuckle if purchaser would rather those parts were left together. Bearings feel smooth and both ABS sensors are in place.

**RolfGolf** · 15-02-2015, 06:28 PM

Originally Posted by tinto

As you can see from these photos - both boots are split on the drive shafts at the gearbox end. One of the joints has been separated from the cup / bearings.
Shafts themselves look fine, but they aren't a quick switch out / bolt on at the moment.

The front knuckles look great - I'll be separating those from the shafts and suspension parts shortly.
Happy to bundle the hub in with knuckle if purchaser would rather those parts were left together. Bearings feel smooth and both ABS sensors are in place.

I'm interested in the front knuckles - (what I call spindles) ... Can you PM me your email or mobile and I'll send you a pic of the parts I'm after to avoid confusion.

Cheers.

**SamS3** · 15-02-2015, 10:33 PM

Do you have the front disc guards by any chance?

If RolfGolf doesn't take the front spindles, I'd be interested.

No worries about the driveshaft, I've sourced one from the UK.