Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32

Thread: Trying to get ACC "Follow to Stop" working...

  1. #11
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,040
    Users Country Flag

    For VW still need a custom harness, but otherwise the comma2 has everything else you need.
    As it's new hardware there is some integration work still to do with VW, that will happen in the near future.

    Join the Discord and check the pinned messages at the top of the volkswagen channel.
    Keep in mind we only got it running last week in PQ/NMS so there is a way to go yet. But if you want to get involved at the beginning of what will be a very exciting journey feel free
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  2. #12
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter
    Since you stated that the NMS Passat has "ACC Low", and the Comma.ai wiki (VW page) describes the stock function of both ACC High and Low, what happens for ACC Low after the driver takes over braking? Does the ACC disable but can then be resumed from a stop with the steering wheel RES button?

    Also, curiously, the VW GTI in USA does not have EPB, yet is equipped with factory ACC High. Makes me think this whole ACC High/Low scenario is not settled...

  3. #13
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,040
    Users Country Flag
    Open pilot will disengage on brake push the same as factory ACC.
    So after coming to a stop you have to resume if you don't have follow to stop.
    With follow to stop OP is able to resume when the car in front moves off.

    Tja has the same behaviour but OP can do a resume from a longer stop (though not indefinitely)

    Also the PR codes are just not ACC high and ACC low.
    There are multiple variants (I don't know what they all are)
    But things like - ACC low with follow to stop and City Emergency Brake. ACC to 160kmh.
    Or
    ACC high with follow to stop and City Emergency brake. ACC to 210kmh. Cyclist detection.
    Last edited by kamold; 10-01-2020 at 07:32 AM.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  4. #14
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter
    Here's what I found for PR codes - Google Translate

    Would OpenPilot bring my car to a full stop without MFD alerting me to apply brakes?

  5. #15
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,040
    Users Country Flag
    Not with ACC low without FTS.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  6. #16
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter
    Well...it seems that OpenPilot enhances the current system but won't get me the function that I really want.

    Do you know of someone reputable who can "hack" by FeC/SWaP for ACC 'Follow-to-Stop'?

  7. #17
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter
    Followup:

    7N0 radar has FEC changed to 10003700 (ACC high; FtS; FrontAssist; CityANB).

    ACC works & FtS tries to stop but ABS releases around 10mph. If i don't apply the brakes, ACC will automatically resume, but if I apply the brakes, RES button starts ACC at any speed. It closer but ABS isn't fully cooperating yet. Word is, there's a GTI in Germany with MK60EC1 and 7N0 radar with FtS. More work needs to be done...

  8. #18
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter
    EPB retrofit completed using 56D module from Chinese NMS Passat. Still trying to get FtS working but it seems 01-ECM may be withholding the function.

    Code:
    VCP+K v8.7.9 16.04.2021 "#WeAreStillHere" Autoscan protocol 2021-05-09 18:05:46.488--------------------------
    
    Adressword  : 01 (Engine Control Module 1} - J623  R4 1.8l TFS  
    VAG no.     : SW: 06K906071BJ HW: 06K907425C 
    SW version  : 3685
    # Coding      : 001A0092246400179000
    ASAM: UDS, EV_ECM18TFS02006K906071BJ 001006
    DATASET: 
    >>> No faults found
    
    ****************************************************
    
    Adressword  : 03 (Brakes 1} - J104 ESP MK60EC1  
    VAG no.     : SW: 1K0907379CC HW: 1K0907379CC
    SW version  : 0175
    # Coding      : C54BC0F5492300FCA30B03EC921A004103F9F01A
    ASAM: TP2.0, CANT=300 CANE=790
    DATASET: 
    >>> No faults found
    
    ****************************************************
    
    Adressword  : 13 (Adaptive Cruise Control} - J428  ACC Bosch PQx
    VAG no.     : SW: 7N0907572B  HW: 7N0907572  
    SW version  : 0120
    # Coding      : 011C1100FE0739
    ASAM: UDS, EV_ACCBEGVW361 001005
    DATASET: V03935236LL
    >>> No faults found
    
    ****************************************************
    
    Adressword  : 53 (Parking Brake} - J540  EPB-4        
    VAG no.     : SW: 56D907801A  HW: 56D907801A 
    SW version  : 0004
    # Coding      : 0F3C55
    ASAM: UDS, EV_ParkiBrakeTRWVW411 002007
    DATASET: 
    >>> No faults found
    
    ****************************************************
    
    Adressword  : A5 (Front Sensors Driver Assistance System} - R242  MQB_B_MFK    
    VAG no.     : SW: 3Q0980654F  HW: 3Q0980654  
    SW version  : 0220
    # Coding      : 000401010001020100201346C080A00080000E200020
    ASAM: UDS, EV_MFKBoschMQBB 001001
    DATASET: V03935238SY
    >>> No faults found
    
    ****************************************************
    Last edited by FLcruising; 14-05-2021 at 12:02 AM.

  9. #19
    Join Date
    Aug 2021
    Location
    Germany
    Posts
    8
    Hi FLcrusing,
    I‘m stuck with a similar problem: FTS not working. But for me, not even ACC works. I have the same FEC than you activated: 10003700, same ABS. The DSG and EPB are retrofitted.

    I have some ideas about FTS we both could try. But I‘d love to first get the ACC running (the old style 3AA ACC worked flawlessly). Maybe you have an idea? I feel like i already tried everything here…



    ———
    Adresse 01: Motorelektronik (CAX) Labeldatei: DRV\03C-906-016-CAX.clb
    Teilenummer SW: 03C 906 016 AJ HW: 03C 907 309 A
    Bauteil: MED17.5.5 A 6711
    Revision: LCH09--- Seriennummer:
    Codierung: 0000077

    2 Fehlercodes gefunden:

    053283 - Steuergerät für Abstandsdistanzregelung
    U1023 - 000 - Bitte Fehlerspeicher auslesen - Sporadisch

    005703 - Codierung/Varianten der Steuergeräte im Antriebsstrang prüfen
    P1647 - 000 - - Warnleuchte EIN

    -------------------------------------------------------------------------------
    Adresse 02: Getriebe Labeldatei: DRV\0AM-927-769.clb
    Teilenummer SW: 0AM 300 050 D HW: 0AM 927 769 D
    Bauteil: GSG DSG AG7 431 9062
    Revision: 00043014 Seriennummer: CU501110076325
    Codierung: 0000020

    Kein(e) Fehlercode(s) gefunden.

    -------------------------------------------------------------------------------
    Adresse 03: Bremsenelektronik (J104) Labeldatei:. DRV\1K0-907-379-60EC1F.clb
    Teilenummer SW: 1K0 907 379 CC HW: 1K0 907 379 CC
    Bauteil: ESP MK60EC1 H46 0175
    Revision: 00H46001
    Codierung: 113B400D892B0001880F02ED911E004183FF507B

    Kein(e) Fehlercode(s) gefunden.

    -------------------------------------------------------------------------------

    Adresse 13: Distanzregelung (J42 Labeldatei:| DRV\7N0-907-572.clb
    Teilenummer SW: 7N0 907 572 C HW: 7E0 907 572
    Bauteil: ACC Bosch PQx H03 0211
    Seriennummer: 1701180452A052
    Codierung: 00001000FE0739
    Betriebsnr.: WSC 01383 790 50316
    ASAM Datensatz: EV_ACCBEGVW361 001006
    ROD: EV_ACCBEGVW361.rod
    VCID: 3634D0FBA8C44CCB65F-8062

    1 Fehler gefunden:
    1043 - Abstandsdistanzregelung
    B10E7 F0 [009] - abgetrennt
    [FAULT_CIS_TSK_IRREV_FAIL]

    -------------------------------------------------------------------------------

    Adresse 53: Feststellbremse (J540) Labeldatei:| 56D-907-801.clb
    Teilenummer SW: 56D 907 801 B HW: 56D 907 801 B
    Bauteil: EPB-4 H05 0005
    Revision: -------- Seriennummer: 30000000225990
    Codierung: 0F3C55
    Betriebsnr.: WSC 12345 123 12345
    ASAM Datensatz: EV_ParkiBrakeTRWVW411 002007
    ROD: EV_ParkiBrakeTRWVW411.rod
    VCID: 2A0CF48B6C7C182BF17-807E

    Kein(e) Fehlercode(s) gefunden.

    -------------------------------------------------------------------------------



    Let‘s sort this out together

    Btw: The german GTI you are referring to is a manual. I have it‘s AutoScan.

  10. #20
    Join Date
    Jan 2020
    Location
    Florida, USA
    Posts
    15
    Users Country Flag Thread Starter

    Quote Originally Posted by passiw View Post
    Hi FLcrusing,
    I‘m stuck with a similar problem: FTS not working. But for me, not even ACC works. I have the same FEC than you activated: 10003700, same ABS. The DSG and EPB are retrofitted.

    I have some ideas about FTS we both could try. But I‘d love to first get the ACC running (the old style 3AA ACC worked flawlessly). Maybe you have an idea? I feel like i already tried everything here…

    Let‘s sort this out together

    Btw: The german GTI you are referring to is a manual. I have it‘s AutoScan.
    Hello Passiw, we have a mutual friend. You are welcome to send PM to exchange info.

    I have Simos 18.2; since you are running MED17, Dennis should have better guidance for this error:
    005703 - Check coding / variants of the control units in the drive train

    First you should get this addressed before we start troubleshooting FtS.

Page 2 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |