EPB decided to not disengage this morning.
Restarted the car and it released ok.

I have the following fault codes against the controller:

Code:
                Address 53: Parking Brake       Labels: 5N0-907-801.clb
Control Module Part Number: 3C8 907 801 A    HW: 3C8 907 801 A
  Component and/or Version: J540 EPB3  VW-10498 0003
           Software Coding: 0000057
            Work Shop Code: WSC 05311 000 00000
                      VCID: 28540A039BFA477E16-807C
5 Faults Found:

03200 - Switch for Electric Parking Brake (E538) 
            012 - Electrical Fault in Circuit - Intermittent
             Freeze Frame:
                    Fault Status: 00111100
                    Fault Priority: 1
                    Fault Frequency: 3
                    Reset counter: 109
                    Mileage: 84789 km
                    Time Indication: 0
                    Date: 2009.14.03
                    Time: 14:40:09

             Freeze Frame:
                    Voltage: 12.30 V
                    Count: 10
                    Speed: 0.0 km/h
                    Hex Value: 0x12E1
                    Hex Value: 0x0001
                    Hex Value: 0x1010

02432 - Supply Voltage for Left Parking Brake Motor (V282) 
            011 - Open Circuit - Intermittent
             Freeze Frame:
                    Fault Status: 00101011
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 109
                    Mileage: 85073 km
                    Time Indication: 0
                    Date: 2009.14.12
                    Time: 08:28:58

             Freeze Frame:
                    Voltage: 13.50 V
                    Count: 30
                    Speed: 0.0 km/h
                    Hex Value: 0x1271
                    Hex Value: 0x0001
                    Hex Value: 0x1010

02433 - Supply Voltage for Right Parking Brake Motor (V283) 
            011 - Open Circuit - Intermittent
             Freeze Frame:
                    Fault Status: 00101011
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 109
                    Mileage: 85073 km
                    Time Indication: 0
                    Date: 2009.14.12
                    Time: 08:28:58

             Freeze Frame:
                    Voltage: 13.50 V
                    Count: 31
                    Speed: 0.0 km/h
                    Hex Value: 0x1271
                    Hex Value: 0x0001
                    Hex Value: 0x1010

16366 - Control Module - Internal Malfunction; CPU 2 
            014 - Defective - Intermittent
             Freeze Frame:
                    Fault Status: 00101110
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 109
                    Mileage: 85073 km
                    Time Indication: 0
                    Date: 2009.14.12
                    Time: 08:28:58

             Freeze Frame:
                    Voltage: 13.50 V
                    Count: 41
                    Speed: 0.0 km/h
                    Hex Value: 0x1271
                    Hex Value: 0x0001
                    Hex Value: 0x1010

16352 - Control Module - Electrical Error 
            014 - Defective - Intermittent
             Freeze Frame:
                    Fault Status: 00101110
                    Fault Priority: 1
                    Fault Frequency: 1
                    Reset counter: 109
                    Mileage: 85073 km
                    Time Indication: 0
                    Date: 2009.14.12
                    Time: 08:28:37

             Freeze Frame:
                    Voltage: 13.60 V
                    Count: 42
                    Speed: 0.0 km/h
                    Hex Value: 0x12F1
                    Hex Value: 0x0001
                    Hex Value: 0x1010
Just wondering if anyone else has had a similar fault and could confirm that simply replacing the control module resolved it?

Thanks