Page 4 of 4 FirstFirst ... 234
Results 31 to 35 of 35

Thread: DQ500 retrofit

  1. #31
    Join Date
    Mar 2024
    Location
    Miami, FL USA
    Posts
    4

    VW MK5 R32 turbo

  2. #32
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,052
    Users Country Flag Thread Starter
    Best bet should be using PQ RSQ3 software. Will need to be modified by a tuner for correct ratios for your gearbox etc.
    You'd need PCMFlash with direct TCU harness and Scanmatik Pro 2 interface to flash PQ software and eeprom.
    Ideally also ODIS Engineering (which can use SM2 in passthru) to flash parameters and possibly different software versions if needed.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  3. #33
    Join Date
    Mar 2024
    Location
    Miami, FL USA
    Posts
    4
    Thank you 👍

  4. #34
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,052
    Users Country Flag Thread Starter
    But again, I've never done this (flashing MQB mecha to PQ) and haven't seen it documented anywhere (also haven't looked, so would recommend trying to find it).
    Have flashed plenty of other MQB hardware modules to the PQ software versions, but never anything as expensive as a mechatronics. And certainly not a module that contains immobilizer data.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  5. #35
    Join Date
    Apr 2021
    Location
    Sydney
    Posts
    3
    Users Country Flag

    nice thread, alot of time and work has gone into this build, I've just completed a tiguan dq500 mqb to s3 cjx mqb,

    with regards to the dq500 pq/mqb flashing back and forth, yes you can to a certain extent. if the mechatronics is the original made in germany 711c/711g it can support both pq and early mqb vehicles. if you have the newer 0de/ogc 711g/h this can only support mqb vehicles. i flash them daily for transmission shops and convert them to dq381/dq500 depending on the vehicle.
    flashing via odis/pcmflash/flex/whatever is possible and immo only matters when you are flashing via obd.

Page 4 of 4 FirstFirst ... 234

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |