Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Another RNS510 post...recommendations

  1. #11
    Join Date
    Jul 2012
    Location
    Sydney
    Posts
    17
    Users Country Flag Thread Starter

    Quote Originally Posted by kamold View Post
    That's an MIB screen only suitable for an MQB car. Not PQ. If installed in an MQB car still needs the MIB unit in the glovebox to run it.
    There is a suitable PQ unit Discover Media/Composition Media PQ.


    To the OP I've already told you via PM that the gateway can be upgraded to newer software to support a gen3 radio.
    yep, told them that too as totally agree with you and if anything, thought was worth a try.....but the advice totally got brushed off by them and was told nah, that wouldn't be the issue. Whole thing was just too hard basket for them and not worth their time or they just have no idea what they are doing.

  2. #12
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,040
    Users Country Flag
    Probably a bit of both.
    Update will take 10mins. If that doesn't fix it then it's a basic electrical consumer hunt which you'd hope an auto elec would be able to perform.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  3. #13
    Join Date
    Jul 2012
    Location
    Sydney
    Posts
    17
    Users Country Flag Thread Starter
    Quote Originally Posted by kamold View Post
    Probably a bit of both.
    Update will take 10mins. If that doesn't fix it then it's a basic electrical consumer hunt which you'd hope an auto elec would be able to perform.
    With the radio fuse out, car all normal and battery fine. Anyone in Sydney who could update the gateway and potentially reinstall the firmware to rns..even an earlier version? Willing to pay anyone to give it a go at this stage. If it works, great, if not, i'll have to think of something else

  4. #14
    Join Date
    Jun 2010
    Location
    Sydney
    Posts
    4,040
    Users Country Flag
    I'm in the north-west. Can update the gateway software so that it properly supports gen3 radios.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

  5. #15
    Join Date
    Jul 2012
    Location
    Sydney
    Posts
    17
    Users Country Flag Thread Starter
    Quote Originally Posted by kamold View Post
    I'm in the north-west. Can update the gateway software so that it properly supports gen3 radios.
    Thanks again Kamold, pm sent

  6. #16
    Join Date
    Jul 2012
    Location
    Sydney
    Posts
    17
    Users Country Flag Thread Starter

    Thanks once again Kamold! absolute legend!!!!!!

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |