Results 1 to 6 of 6

Thread: 2009 Passat CC 2.0 TDI - Underbody Plastic Shield

  1. #1
    Join Date
    Apr 2011
    Location
    South Yarra
    Posts
    199
    Users Country Flag

    2009 Passat CC 2.0 TDI - Underbody Plastic Shield

    Does anyone know the part number of the underbody shield /splash guard / belly pan for a 2009 Passat CC 2.0TDI? Just took it off as it was scraping on the ground!

    I believe it should have 7 x Torx25 screws holding the sides (3 on each side and 1 at the middle front with clips) and 3 Torx45 screws at the back (these ones screws directly into the metal underbody - no clips).

    Does anyone know where you can get the Torx screws - I don't have any of the Torx45 that hold the back section and screw directly into the metal underbody.
    Last edited by Deep Blue; 13-12-2020 at 04:43 PM.

  2. #2
    Join Date
    Dec 2011
    Location
    Pacific Paradise QLD
    Posts
    7,151
    Users Country Flag
    Why not take one of the ones you still have to a place that sells bolt and see if they have correct threads.

    The ones that screw into the rear cross member will be bolts At least on my B7 they were and also on my Tiguan

    VW parts dept should have them or at least the part numbers

    Have a look here for info Its near the end Page 275 on the page number NOT the counter at the bottom of screen




    https://drive.google.com/file/d/19sS...ew?usp=sharing


    Should be ok now
    Last edited by Hillbilly; 13-12-2020 at 09:51 PM.
    2021 Kamiq LE 110 , Moon White, BV cameras F & B
    Mamba Ebike to replace Tiguan

  3. #3
    Join Date
    Apr 2011
    Location
    South Yarra
    Posts
    199
    Users Country Flag Thread Starter
    Okay, thanks Hillbilly.

    I don't have any of the three rear ones (T40) to take with me - these must be bolts as they screw directly into the metal underbody; not too fussed re the sides and front (T25 screws with clips).

    Will have a look at your link - thanks!

    Edit: The google link is password protected.
    Last edited by Deep Blue; 13-12-2020 at 06:15 PM.

  4. #4
    Join Date
    Apr 2011
    Location
    South Yarra
    Posts
    199
    Users Country Flag Thread Starter
    Quote Originally Posted by Hillbilly View Post
    Why not take one of the ones you still have to a place that sells bolt and see if they have correct threads.

    The ones that screw into the rear cross member will be bolts At least on my B7 they were and also on my Tiguan

    VW parts dept should have them or at least the part numbers

    Have a look here for info Its near the end Page 275 on the page number NOT the counter at the bottom of screen




    https://drive.google.com/file/d/19sS...ew?usp=sharing


    Should be ok now

    Thanks Hillbilly - really appreciate that!!!

  5. #5
    Join Date
    Apr 2011
    Location
    South Yarra
    Posts
    199
    Users Country Flag Thread Starter
    Found the part number of the underbody shield (taken from actual part removed):

    CCW 3C0 825 237 H

    ZSB 3C0 825 235 M

    2009 Passat CC 2.0 TDI - Underbody Plastic Shield-bellypan-jpg

    Apparently it has three purposes: reduces noise (probably why all those cubic dimples on the inside), improves aerodynamic airflow underneath the vehicle, and protects the underside of the engine (especially electrics) from road grime and water. I find it's also good to ensure no oil drips end up on the driveway!
    Last edited by Deep Blue; 15-12-2020 at 02:39 PM.

  6. #6
    Join Date
    Apr 2011
    Location
    South Yarra
    Posts
    199
    Users Country Flag Thread Starter

    All done - all ten fasteners (three bolts at the back and seven screws) accounted for!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |