Genebaby: Notwithstanding that I consider your project to install a LHD center console into a RHD car to be "quite novel" (read, very "courageous") - perhaps something like this
Don't get me wrong, I wish you every success in the venture. However, at some point in the retrofit, a part (or more likely multiple parts) of the new LHD console will need to fit into existing part(s) on the RHD car. It might be clear to you, but I'm not quite sure how much of the RHD dashboard needs to be replaced around the center console area.
As an alternative and with the caveat that I have never installed one of these modules - it looks like the active part of the module is just clipped into the bottom of the cubby housing - see the tabs in the picture below from your link:

If this is the case, then perhaps a "less-courageous" option is buy a 2nd-hand cubby from another RHD car (wrecker purchase) and modify the attachment arrangement? Even if you have to plastic-weld the module enclosure to the RHD cubby, all the work is done on the underside of the cubby - so it's not seen!! And, in the alternative that you don't have the skills required to fix the module to the bottom of the RHD housing - you have saved the price of a new LHD cubby, which can be spent on the services of a professional provider!!
In any event, I would personally start by trying other solutions first; marrying-up disparate parts from different drive vehicles can only result in many tears and in multiple expletives - IMHO, of course!
Don
Last edited by DV52; 13-08-2020 at 12:37 PM.
Please don't PM to ask questions about coding, or vehicle repairs. The better place to deal with these matters is on-line, in the forum proper. That way you get the benefit of the expertise of the wider forum! Thank you.
Bookmarks