Support VWWC

Results 1 to 2 of 2

Thread: Patching non-nav units / activating sports HMI

  1. #1
    Join Date
    Feb 2024
    Adelaide, South Australia

    Patching non-nav units / activating sports HMI


    I have a 2017 Polo GTI which is heaps of fun and I would like to unlock the remaining supported features, like sports HMI. I used OBDEleven to install the FEC/SWaP code for this feature but it shows up as invalid because the unit has to be patched first.

    I've googled extensively but I can't find anything that applies to my unit specifically. The instructions require units with navigation (2 SD card slots) and mine doesn't have nav (only 1 SD card slot). Could someone help me understand if it's even possible to patch this hardware, and if so point me in the right direction please? It would be much appreciated.


    Installed SW MU version: 0363
    Part number 3Q0035824B
    Hardware: H31
    Software version H28.28.185_STD2Plus_EU
    Installed SW train version: MST2_EU_VW_ZR_P0363T

  2. #2
    Join Date
    Jun 2010
    Users Country Flag

    You need to read and write directly to the eMMC flash on the board to modify the system to allow unsigned FEC.
    That requires opening it up and using using a suitable adapter soldered onto the board to be able to mount the file system, or read and write in raw format.
    2011 Skoda Octavia vRS TDI DSG wagon|Revo Stage 1|Race Blue|Leather|Dynamic Xenons w 6000K|9w7 BT|THA475 Amp+active sub|Whiteline ALK|RVC|
    2009 R36 wagon|Biscay Blue|RVC|Tailgate|ECU and DSG tune|LED DRL/Indicators|3D colour cluster|Quad LED tail rings|Climatronics upgrade|Dynaudio retrofit|B7 RLine Flat Steering Wheel|3AA CCM|TPMS Direct|B7 Adaptive Cruise with Front Assist|Discover Media retrofit|PLA 2.0|Lane Assist|BCM retrofit|High Beam Assist|DQ500

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
| |