MMI3G Red Screen HELP Please!!!

[Fianos]

Hi all, i am new here, i am desperately trying to find out what's the problem with this, played with the engineering mode for like 5 minutes the day i got my ODBeleven and pressed something

I am trying to avoid pulling half the dashboard out and have to find laptops with Windows.



-------------------------------------------------------------
19 Gateway
System description: GW-CAN-L-FR-M
Software number: 7P6907530K
Software version: 6032
Hardware number: 7P6907530G
Hardware version: H13

Faults:
U140B00 - Energy management active
Intermittent
Priority - 7
Malfunction frequency counter - 2
Unlearning counter - 195
km-Mileage - 165915 km
Voltage terminal 30 - 11.5 V
Voltage terminal 15 - 1.1 V
Control module temperature - 32 °C
System status - Awake_Timer_active
Terminal 15 status - Off
Terminal 15 status via CAN - Off
IN ZAS Kl X - Off
Engine running - Off
IN ESP Stillstandsflag - standstill detected
Datenfeld - 3
date - 2023-06-15 04:43:37



---------------------------------------------------------------
5F Multimedia
System description: H-BNT-RW
Software number: 7P6035764E
Software version: 0816
Hardware number: 7P6035764A
Hardware version: H40

Faults:
No trouble codes found


---------------------------------------------------------------
5F Multimedia
System description: H-BNT-RW
Software number: 7P6035764E
Software version: 0816
Hardware number: 7P6035764A
Hardware version: H40

Faults:
00658 - Operating unit
Intermittent
priority - 5
frequencyCounter - 1
drivingCycle - 196

02259 - Front information display control head
Intermittent
priority - 5
frequencyCounter - 1
drivingCycle - 196
km-Mileage - 165916 km
date - 2023-06-15 08:24:47

00658 - Operating unit
Intermittent
priority - 5
frequencyCounter - 2
drivingCycle - 196





---------------------------------------------------------------
01 Engine
System description: 3.0TDI EDC17
Software number: 7P0907311C
Software version: 0005
Hardware number: 4G0907401
Hardware version: H41

Faults:
No trouble codes found


---------------------------------------------------------------
01 Engine
System description: 3.0TDI EDC17
Software number: 7P0907311C
Software version: 0005
Hardware number: 4G0907401
Hardware version: H41

Faults:
U140A00 - Terminal 30
Open circuit
Intermittent
Priority - 2
Malfunction frequency counter - 1
Unlearning counter - 255
Engine speed - 0.00 1/min
Normed load value - 0.0 %
Vehicle speed - 0 km/h
Coolant temperature - -40 °C
Intake air temperature - -40 °C
Ambient air pressure - 0 mbar
Voltage terminal 30 - 0.000 V
Dynamic environmental data - 20961D13BA0000000014B3000011390000133A000012FB0000

P068A00 - ECM/PCM Power Relay De-Energized Performance - Too Early
Intermittent
Priority - 2
Malfunction frequency counter - 1
Unlearning counter - 255
Engine speed - 0.00 1/min
Normed load value - 0.0 %
Vehicle speed - 0 km/h
Coolant temperature - -40 °C
Intake air temperature - -40 °C
Ambient air pressure - 0 mbar
Voltage terminal 30 - 0.000 V
Dynamic environmental data - 20961D102A000011EA00106C0011C60011F800117600100D00

[Guest001]

Look in your history to see what you did and reverse it.
So many just "do things" without a clue and then come on forums asking how to fix it.
The Facebook OBDELEVEN forum is just a list of "Ive done something and dont know what i did"
"How do I fix it"
Also like here they fail to say what VEHICLE they are working on.
There are about 100 VAG vehicles that this device works on and not all of them are the same and there are at least 1000 settings that can be made.
How are people supposed to answer questions when you dont provide the correct info.

A helpful suggestion is. Get a sheet of paper and as you do things WRITE DOWN WHAT YOU DO.
I still do that even after using one for 4 years. Saves fixing what shouldnt be broke.

[Fianos]

Bless your injections mate, thanks a lot!!!
Pure gold and str8 to the point.

[kamold]

Reversing whatever was done will not get it out of emergency upgrade mode you need to reload the firmware.
It's an RNS850 need to put the correct firmware onto an sdcard and insert to allow it to load.
mibsolution.one should have the firmware.