Stud Pattern or offset?Quote:
Originally Posted by Samuel
Stud pattern is 5x130, offset could be anything from 15 to 60, depends on the wheels and what car they came off
Printable View
Stud Pattern or offset?Quote:
Originally Posted by Samuel
Stud pattern is 5x130, offset could be anything from 15 to 60, depends on the wheels and what car they came off
Car: FWD
Front: 17x8.5et23 205/45
Rear: 17x8.5et18 205/45
Arch height to ground Front: TBC
Arch height to ground Rear: TBC
Fenders Rolled: Yes
Fenders Pulled: No
Camber: ~1deg extra rear, front has 1 deg extra pulled from the bottom (makes offset more agressive)
Attachment 5945
Attachment 5946
Offset measurements were taken after a few beers, so ill also confirm that when they are off the car
haha madness :P
Car: 2000 GTI
Wheels: BMW X5
Front: 19x9 et23 (after 25mm adapter) 225/35/19
Rear: 19x10 et25 (after 20mm adapter) 235/35/19
Fenders Rolled: yes (all four)
Fenders Pulled: 2mm in rear
Camber: Front -1 / Rear is standard
Suspension: Fk Ak street's with helper springs removed and Ground Control camber plates in front.
Notes: Car was lower but had to be raised 5-10mm all round due to rubbing and grinding all over the place.
http://www.vwwatercooled.com.au/foru...a572d199-1.jpg
http://www.vwwatercooled.com.au/foru...ebesuhu8-1.jpg
http://www.vwwatercooled.com.au/foru...0da7ea93-1.jpg
Attachment 6019
^that looks so good
added SLAJ, looked awesome!!! grab an arch to ground next time you're on a flat surface
been getting a heap of PMs again lately regard specs, so please list up your specs here to help out others to save me repeating myself over and over :P
Iv already posted these wheels, but bit of an update due to front end changes. put changes in bold
Car: Bora FWD 2lt
Front: 18x8 ET19 215/35/18 Nankang NS20
Rear: 18x9 ET31 225/35/18 Nankang NS20
Arch height to ground Front: 22" (might be lower now)
Arch height to ground Rear: 22"
Fenders Rolled: Front only
Fenders Pulled: No
Camber: Front 1deg, but due to being pulled from the bottom it makes offsets more aggressive / 1deg extra in rear
Attachment 6323
Attachment 6324
Car: FWD
Front: 18x8.5 et35 225/40/18(3mm spacers, needed theses to clear the coilover)
Rear: 18x8.5 et35 225/40/18 (6mm spacers, for looks only)
Arch height to ground Front:630mm
Arch height to ground Rear: 635mm
Fenders Rolled: No
Fenders Pulled: No
Camber: Front No / Rear No
Suspensinon: Jom coilovers, rear has spring only (no adjusters)
Side note: Car also has rear centering plates installed and no interior, It did sit lower in the rear with interior and sound system installed (amps, subs, false floor etc)
http://www.vwwatercooled.com.au/foru...00ad26cb-1.jpg
http://www.vwwatercooled.com.au/foru...634b271b-1.jpg
http://www.vwwatercooled.com.au/foru...9cc574d0-1.jpg
^^ ooo they actually sit pretty fat looking at it from the other angles. love it!
It is a little be deceiving until you see it from that angle. The rear definitely could go a little wider teamed up with a 215/40.