EOI mk4 V5 bora audio install

[Hairy_mic]

VW Bora Custom Fibreglass subwoofer build. (large photo content)

Bora is in the scrapyard, would anybody be interested in a 95% project that took me many hours to complete.

setup does not include any power cable

includes JVC head unit, and the entire wiring loom to the rear setup
reversing camera
subs,
moulded enclosures which are carpeted using the vw boot liner (colour is perfect blends will with rest of boot)

outside needs painted / carpeted.
i will provide some carpet to do the job,
2 filler pieces of mdf will need to be cut to fill the gap between the false floor and the side of the boot (would honestly take a diyer an hour )

basically everything in the thread except the power cable and fuse.

if you have a v5 this thing will fit straight in

[Hairy_mic]

Fibreglass Moulder sub enclosures looking for a new owner. Will fit shallow mount 10” speaker. These bad boys took me forever to build

I want a carton (or $50) . And the postage paid

I’ll get a shipping quote if your interested


Sent from my iPhone using Tapatalk

[joshmrmateria]

i'd be on this like a shot if it would fit my v6 graeme

[Hairy_mic]

Before I scrapped the v5 I asked the same question. Based on pictures it looks like the boot liner is the same shape, but the entire floor is about 50mm higher. would need to slice about 50mm off the bottom of each unit. (Easy job with a renovator type tool. And patch. Would be a few hours each to do. But I’m honestly not sure if they would fit. If you could send a pic of both sides of the boot I could verify ( take pic of medical flap down as this was removed for install)



Sent from my iPhone using Tapatalk