T5, T6 Stop/Start OFF

Nope... I have a feeling the only reason I thought it worked initially was because maybe the engine hadn't warmed up sufficiently yet to allow stop/start to become active. Once warm, although I get the 'not active' symbol in the MFD, the engine continues to shut down when i stop. Happens whether in D, S, or even if I shift to N before coming to a stop!
Back to the drawing board... Miro, what software do you use to do this?

Quote:

---

Originally Posted by MGV

Nope... I have a feeling the only reason I thought it worked initially was because maybe the engine hadn't warmed up sufficiently yet to allow stop/start to become active. Once warm, although I get the 'not active' symbol in the MFD, the engine continues to shut down when i stop. Happens whether in D, S, or even if I shift to N before coming to a stop!
Back to the drawing board... Miro, what software do you use to do this?

---

The VCP

My T6 just had its first service yesterday (at an independent workshop, Award European in Boambee). Asked the guys there to have a go at disabling stop/start as it was mainly unsuccessful doing it with the OBDEleven dongle & app. I say mainly unsuccessful as I disabled it, but it would only work as I intended (deactivated) about 10% of the time. And it would still cut the motor when it was cold, which it's not supposed to do.

Anyway, they did it at the workshop with VCDS with 100% success! Tech said he changed the parameter for the coolant temp for stop/start to become active to an unachievable value.

Yay!! :-)