Help with engine code.

[Spyda]

Ive got an audi 8v engine with the engine code SD.

Does anyone have any specs on it, displacement, what car it came out of, power it produces etc etc?

An internet search has given me mixed results. The most consitant result is that its a 1.9L from a 1986-1988 Audi 80, can someone confirm this and did it come with carbies or injection and what power did it put out?

[static1800]

1986 - 1988
Audi 80
113hp

[Spyda]

1986 - 1988
Audi 80
113hp

carbi or injected?

[DVR68U]

injected, you could run carbies with some work

[Golf Loon]

Yup, 1.9 from 88 Audi 80.
It has the bigger intake ports, so you will need a Mk3 inlet manifold, or make an adaptor plate.

[Spyda]

The engine is in a mk1 and runs like a dream, i was shocked because the rest of the car is a POS.
Its got a webber carbie on it and im not sure about the manifold or an adapter plate as i havnt really looked, im not familiar with carbies so i dunno what kind of webber it is either, i suspenct it one of them down draft passat deal-ies.
Ill get pics if i can and maby someone will be able to tell me more.

The engine drives a mk2 gti 'box aswell so the 1.6auto in the 3door will be thrown out and replaced with the 1.9l 5speed. Will have pics of the whole project a lot later.

Cheers guys!

[dub be good to me]

injected, you could run carbies with some work

I had an 1.9L SD in my mk1 and just replaced it with a kjet Gti 1.8, it didn't have injection holes though?

I ran a down draft and a side draft carby (weber+passat mani, then later a dellorto+lynx mani) with no problems.

Carby should be stamped etc..

[Spyda]

Here are a few pics:







It has a wierd thing between the intakes for cyl 3 and 4 that looks like another intake hole. Its not blocked off on the out side but when i poke around inside i dont feel that extra hole.

I had an 1.9L SD in my mk1 and just replaced it with a kjet Gti 1.8, it didn't have injection holes though?

I ran a side draft carbies (weber+passat mani, then later a dellorto+lynx mani) with no problems.

Carby should be stamped etc..

Do you sitll have the carbies and mains?
Would they be an improvement to what ive got?