What did you do to your Polo today?

Quote:

---

Originally Posted by Evaded Motorsport

Think I said earlier that I got my IPad mounted up, used the kit from Holdmyphone and Ipad Integration kit from Cushie Audio.

Works really well, took all of one minute to fit.

Still toying around with Dash Command, haven't had time to install Revs 2.

---

How is the refresh rate for the data? I have seen some (not totally credible) complaints of slow response about the Kiwi WiFi on some web forums.

Quote:

---

Originally Posted by noone

KW V1's on the way...

---

Had enough of the AP?

I'm getting old... It rides well, but I spend too much time in traffic ATM to justify the ride.

When I was using the car primarily as a toy for cruising it was great. It's wonderfully at speed but a little jiggly when going 10kmph over crap roads...

Quote:

---

Originally Posted by noone

KW V1's on the way...

---

Yayyyy!!!!!!!

Installed the BMC air filter (thanks Thunder!) and the Seat Intake.

The air filter was a piece of cake (obviously) however the filter was quite stubborn.
At first the screw holes at the end of the hose didn't line up and after pulling it out again and then re-inserting they lined up on a slight angle and with a some diagonal screwdriver work was able to get them together.

Unfortunately there's a slight vibration (i think from the ribbed part of the hose against something else).
Anybody else had this problem?

You can hear it with the bonnet shut?

Quote:

---

Originally Posted by noone

You can hear it with the bonnet shut?

---

Not sure yet. Took it for a short drive before with the windows down however it was quite windy so I couldn't be sure.
It's a quite loud vibration with the bonnet up when stationary (with varying revs) and even with the bonnet down it is audible.

I'll see how it goes with another drive and if I can't hear it on the move I won't worry about it.

i'm assuming you are talking about the Seat intake section? There is not much space around it, if its just up against a pipe you could put something in between.

Yeah it's the PD160.
I'm thinking if it gets too much on my nerves i'll put some gauze or something heat resistant in between.
In regards to connecting the hose to the trumpet, they click together well but does it need anything to adhere them together?

Quote:

---

Originally Posted by Bflat

Yeah it's the PD160.

In regards to connecting the hose to the trumpet, they click together well but does it need anything to adhere them together?

---

You can put a black cable tie around it, need a long one tho