Hey Guys,

Carried out some of my SAI delete the other day. Removed hoses from Air pump and disconnected, plugged combo valve at both ends as i don't have my blank plug yet. At first i totally removed the two sensors, vacuum tank + lines and ran one vacuum line straight from my DV to intake manifold. Started, idles and drove ok but the boost wasn't there..

Therefore I brought it into work today and re installed everything. Scanned, had a **** load of faults, cleared them and started back up straight away all of these faults come back.

Sai delete, issues plz help-11099416_1667410636822839_9030222633320161152_n-jpg


Now I DO have my boost back, car driving well but still lacking some low range RPM due to this Bank 1 Camshaft fault.. I don't get It haven't even touched the wires for this sensor.

I've checked all the wiring in those areas nothing is melted or trapped. Seems like that sort of an issue, I've also checked all of my fuses.

Any help would be greatly appreciated! Thanks!