Retune - the last mod?

Printable View

Show 40 post(s) from this thread on one page

30-05-2012, 04:30 PM
vwthunder

Quote:

Originally Posted by Sharkie

Also, anybody know of these guys or what their products are like?

RP K04-0001 - K04 VW Transverse 1.8T: RPTURBOS.COM - Replacement & Performance Turbochargers

Oh there were a few threads about a bad batch of them that were throwing seals i think, i researched them before i went frankenturbo. I have not found one thread about a frankenturbo blowing etc, but the manifold that comes with it is crap

http://forums.vwvortex.com/showthrea...from-ECS/page2
30-05-2012, 04:37 PM
Sharkie

Quote:

Originally Posted by vwthunder

Oh there were a few threads about a bad batch of them that were throwing seals i think

VWVortex.com - RP TURBO from ECS

Thanks, all I needed to know to stay clear of them!
30-05-2012, 04:39 PM
vwthunder

Quote:

Originally Posted by Sharkie

Thanks, all I needed to know to stay clear of them!

Think there was a guy who had his car apart for 4-6 months waiting for a replacement one :facepalm:
30-05-2012, 04:45 PM
kaanage

Quote:

Originally Posted by vwthunder

My Frankenturbo drives totally different and so much smoother than the K03 with the APR tune, There was so much torque before, well it was nothing or everything, which made the car hard to drive as it wanted to take off all the time. It is more linear now and smoothed out the curve.

Is it possible that it has smoothed out the power delivery by not spooling up so quickly (so you don't get a big wack of torque with the fast spool of the K03) and then continuing to make power further up the rev range (where the K03 runs out of puff)?

pure speculation on my part...
30-05-2012, 04:58 PM
vwthunder

Quote:

Originally Posted by kaanage

Is it possible that it has smoothed out the power delivery by not spooling up so quickly (so you don't get a big wack of torque with the fast spool of the K03) and then continuing to make power further up the rev range (where the K03 runs out of puff)?

pure speculation on my part...

That would be correct, but i still never really have to rev it out.
Dont really need to use the little bit more top end it has, but it does feel strong mid range
30-05-2012, 05:11 PM
VWindahouse

Quote:

Originally Posted by spraycanmansam

VWindahouse, just having a quick read of your previous post...

I can't remember your supporting mods at the time off the top of my head, but would you say that fitting a high-flow HPC-coated ex manifold would give a comparable power increase to a K04 conversion?
It would be interesting to put the costs of your modded K03 route (at the time of your dyno results) v. the K04 conversion to see the price/kw comparison. I remember reading your thread thinking it sounded like a great mod for how well it's been reported to drive.

Yes mate, and I also believe I will have the highest torque figure of all the polo's at the moment because of it. It was about $350 at the time and $300 for the chrome HPC plus fitting which I can't remember sorry. It's was actually cool to touch like it had been cooled in a fridge for a bit.

Quote:

Originally Posted by Sharkie

I think you guys underestimate the bang for your buck of the K04.

To me dyno figures quoted individually have no meaning. 3 or 4 cars on the same day on the same dyno is what counts.

I have seen (in the presence of at least 3 other K03 Polo GTIs) 2 x K04 APR Polos on the dyno. 1 with minimal extras except for the K04 making 145kw atw and 1 with exhaust and FMIC making 152kw atw. On this day a Stg 2 K03 Polo with extra goodies made only 137kw atw .....

The 145kw atw K04 Polo probably had spent all of $3000 to make that power. Most of the K03 Polos making close to that have spent a fair bit more than $3000. My Polo makes a solid 140kw atw and I have spent at least $5000 to get that far .....

So while some of the K03 Polos are approaching K04 power, the amount of $$$ spent is more ..... Go K04 and add some extras and 160kw atw is not impossible .... No K03, no matter how tuned (or by who) will even get close.

That was the same day, same dyno, same operator and temps mate back to back. I just went back to the same place after to see what I gained with the correct rated spring and so did the other APR with K04 when he changed his FMIC.

Quote:

Originally Posted by Sharkie

Also, anybody know of these guys or what their products are like?

RP K04-0001 - K04 VW Transverse 1.8T: RPTURBOS.COM - Replacement & Performance Turbochargers

As Troy said they go pop!!
30-05-2012, 05:16 PM
VWindahouse

So it looks like we have a few volunteers for a dyno challenge Guy. How about next Saturday morning??
30-05-2012, 05:29 PM
leitch

I would be so keen to jump on the dyno with Guy. Anthony - next Saturday (or any Saturday) would be awesome - heading to Jimmy's on Wednesday for some fun bits so it would be interesting to see the result on the dyno.
30-05-2012, 05:29 PM
s4mmie

^ I'd be up for it
30-05-2012, 05:31 PM
VWindahouse

Quote:

Originally Posted by leitch

I would be so keen to jump on the dyno with Guy. Anthony - next Saturday (or any Saturday) would be awesome - heading to Jimmy's on Wednesday for some fun bits so it would be interesting to see the result on the dyno.

Sweet, what's the Jmac fitting for you :banana:

Show 40 post(s) from this thread on one page