Printable View
Has anyone who has bought a K&N filter for their polo GTI recently still got the product code? The code KN33-2920 above is different to the one that a guy at Autobarn gave me last week which was KN33-2830?
I am wanting to purchase one but want to make sure i get the right one.
Your help is greatly appreciated.
According to this site K&N The correct filter is 33-2830. And again Here http://www.knfilters.com/search/appl...x?Prod=33-2830
It seems the 33-2830 is for the GTI / TDI (thanks sharkie)
where 33-2920 is for 1.4L and 1.6L
33-2830 is what I have installed.
Also will fit the 1.9TDI
Yup, I got the 33-2830 for my GTI as well.
T Go.
Correct, as this thread was originally created when we were searching for a panel for Justin's 1.6 - we've since fitted a pod.
Thanks for your help guys!!!!!
I just got one off ebay(thanks for the link Shaneth).
My pleasure mate.Quote:
Originally Posted by callen
has anyone looked into this intake:
http://www.knfilters.com/search/prod...x?Prod=57-0569
As said many times before on various threads here.....
Unless you find a way to feed cold air to the pod and shield it properly, after 25mins of running it sucks in hot air and power drops off noticably.
I experimented and tried various ways of doing a pod and eventually gave up as air intake temp got too high .... Feel the inside of the left fender after 25mins of running and see how hot it gets. Not enough airflow in the Polo engine bay to make it worthwhile.
Can anyone confirm whether this will fit a 6R GTI? Orange tuning have it listed under 6R 1.4lt, so i assume it should.