Hi All,

I have a 2007 polo GTI

I just bought myself the xcarlink I-pod adaptor with the bluetooth kit as well.

It will be used with an iphone not an ipod

I would like to install it myself as it looks easy enough and the kit came with the keys to remove radio..

However..

I am not sure how easy it would be to route all the cables for the device. I read that most people put there unit in the glovebox but I didnt want to do this for two reasons
1) glovebox is already small and so much stuff in there already and phone is not within reach should I want to use it
2) because it has the bluetooth kit I am not sure if the cord would reach all the way from the glovebox to the drivers side for the microphone

I would really love to put the device in the bench underneath the steering wheel as that leaves the phone easily accessible should I want to still use it but I noticed there is no access holes here so I am assuming if I wanted to place the kit here I would have to cut holes?

Anyways I guess I would just like some advice for the placement of the unit without having to put it in the glovebox.. How many panels would I need to remove and how difficult is that for feeding the bluetooth part up to the drivers side?

I am considering just taking it to a car installation place to get them to do it if it looks too hard as I dont want to stuff the job up

Thanks!