How to reset/apply Basic Settings for the 7 Speed DSG?

[Digitalic]

I want to reset my DSG using my VAGCOM cable, and all the documentation I can find about DSG reset is for the 6 Speed DSG

Anybody knows how can I perform these settings for the 7 Speed? Are the procedures the same? I basically don't want to f*ck up my gearbox and have to tow my car to the dealership or something...

Thanks in advance!

[grtuned]

Basic settings do not need to be done unless your replacing the mechatronics or the gearbox??? Are u having issues???

[Guy_H]

The documentation doesn't exist for the 7 speed, it can be done with the factory tool though

[Umai Naa!!]

It can be done with VAS-PC, but it is only for new transmissions and mechatronics. Don't do it, otherwise.

[Digitalic]

I want to reset it because after much research online about some of the issues I've been experiencing with my car (jerky and untimely shifting between 1st and 2nd gear at low speeds), most of them directly point to the DSG needing to re-adapt.

Also, alot of people report improvement after performing basic settings on their 6speed DSG, so I thought I might try it.

[RW1]

I want to reset it because after much research online about some of the issues I've been experiencing with my car (jerky and untimely shifting between 1st and 2nd gear at low speeds), most of them directly point to the DSG needing to re-adapt.

Sure you haven't got this??? ......http://www.vwwatercooled.org.au/foru...ear-45873.html Not resolved yet in the Bulletin 2026097/1 (see page 3).

There is a DSG 7 speed Controller software update recently. Pop into the dealer and ask. Gives different speed (mph) change points for the gears and quicker manual gear changing as well.

As said above - Basic Settings ..... not for this sort of problem.

[Jwarnes71]

To Digitalic.
YOU are Da MAN
fixed my passat. Was shudding and feeling awefull.
Now its like a new car.
If any babe u fail to nail disrespects you tell em John boy in AU said YOU ARE THE MAN