Support VWWC

Results 1 to 3 of 3

Thread: Door Trim Removal

  1. #1
    Join Date
    Nov 2009
    Location
    Adelaide, SA
    Posts
    3,591

    Door Trim Removal

    I'm thinking of installing some Dynamat in the front doors of my Golf GTI to improve bass performance and reduce road noise (thanks for the tip TDiJetta09!).

    But before I do, I was wondering if anyone knows of the proper procedure for removing the door trims? Eg the location of clips and the order in which they should be removed (and subsequently replaced when refitting the trims)? The last thing I want to do is break clips and add rattles!

    Thanks!
    2008 MkV Volkswagen Golf R32 DSG
    2005 MkV Volkswagen Golf 2.0 FSI Auto
    Sold: 2015 8V Audi S3 Sedan Manual
    Sold: 2010 MkVI Volkswagen Golf GTI DSG

  2. #2
    Join Date
    Apr 2009
    Location
    Sydney, NSW
    Posts
    326
    Users Country Flag
    Not sure on the procedure Adam. Google didn't turn up much. But I would recommend getting a set of these from Jaycar before you do.
    Car Panel Removing Tools - Jaycar Electronics

    I used them to remove the Roof console and A pillar trim and RNS510 surround. They are great.

    Aha!! Found a link for you.
    http://golfmk6.com/forums/showthread.php?t=5095
    Last edited by Ozram; 07-07-2010 at 07:03 PM. Reason: Add Link

    GTI MY16.5 PURE WHITE | LAKIN PLATE HOLDER | TINTS |

  3. #3
    Join Date
    Nov 2009
    Location
    Adelaide, SA
    Posts
    3,591
    Thread Starter

    Thanks Ozram - great link, much appreciated!
    2008 MkV Volkswagen Golf R32 DSG
    2005 MkV Volkswagen Golf 2.0 FSI Auto
    Sold: 2015 8V Audi S3 Sedan Manual
    Sold: 2010 MkVI Volkswagen Golf GTI DSG

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
| |