PDA

View Full Version : 21 inch Mallory wheels



Big_Dave
01-09-2014, 03:22 PM
Hi Guys,
Can someone advise the stud pattern and offset for these wheels which come standard on the V8 TDI?

I am looking to change to to Black Gloss rims and need info to shop around.

Have tried search function but couldnt see info.

Cheers All.

David

Dutch77
01-09-2014, 03:55 PM
Should be 21 x 9.5, ET59, PCD 5 x 130 - but that's not official. As you suggest, information on these isn't everywhere.

If you have the vehicle already (judging by your sig) just check the wheel for the width and offset information, normally stamped on the back/inside?

tigger73
01-09-2014, 03:57 PM
+1 as Dutch said worst case take one wheel off and the info should be stamped on the inside (unless you can get a hand/camera around the back and snap a shot at the right place).


Sent from my iPhone using Tapatalk

Big_Dave
02-09-2014, 02:25 PM
Cheers all.

V10Touareg
17-07-2016, 04:52 PM
Given a wheel size and vehicle model, measure from the centre of one stud to an adjacent stud.

It's 85mm for a 19" Touareg, for example.

That will tell the wheel guy if its 5 x 120 or 5 x 130.

Dishing and offset follows from the model.

Cheers,
Stu